Reference Guide

62
TASCAM DR-40X
10 – Mixer
This recorder has a mixer function that allows you to set
the built-in effect, stereo balance and volume level for each
channel.
During mixdown (See "Mixdown" on page 59) and
playback, you can make fine adjustments to the recorded
sound by using this.
Making mixer settings
1.
From the Home screen, press the MIXER button to open
the Mixer Screen.
During 4-channel file playback
During overdubbing (mix) mode
During 4-channel file playback (MS decoding of channels 3/4)
2.
Use the . and / buttons and the + and – buttons
to move to and select the item that you want to adjust.
Each column is a channel and each row is a setting type.
3.
Press the ENTER/MARK button to open the setting
name and value in a pop-up window at the top right.
4.
Use the + and – buttons to change the setting value.
Item
Setting
range
Operation details
SEND
0–100
Adjusts the send level (0
(min.)–100 (max.)) of the
selected effect used on the
signal (See "Setting the effect"
on page 61)
PAN/BAL
L12–C–R12
Adjusts left-right balance
(L12 (left)–C (center)–R12
(right))
LVL
0–100
Volume level
(0 (min.)–100 (max.))
5.
Press the ENTER/MARK button to return to the previous
screen where you can select the next setting that you
want to adjust.
NOTE
i
The mixer can be used when recording, in recording
standby, playing back, paused or stopped.
i
Even when the Mixer Screen is open, you can use the
PLAY [7] button to start playback and the ¤ (HOME)
[8] button to pause playback.
i
When the REC MODE screen MS DECODE item is on, MS
DECODE on the Mixer Screen Quick menu cannot be used,
and shows a message saying “Using by Input”.