Reference Guide
TASCAM DR-40X
73
14 – Using the REMOTE jack
Remote control (TASCAM RC-10)
Wired remote control
TASCAM RC-10 (sold separately)
Setting the wired remote control
Use the REMOTE Screen to set the wired remote control.
1.
Press the MENU button to open the MENU screen.
2.
Use the + and – buttons to select the OTHERS menu, and
press the ENTER/MARK or / button to open the
OTHERS screen.
3.
Use the + or – button to select REMOTE, and press the
ENTER/MARK or / button to open the REMOTE
screen.
4.
Use the + or − button to select CONTROLLER, and press
the ENTER/MARK or / button.
5.
For the CONTROLLER item, use the + or – button to select
RC-10. (Default: RC-3F)
6.
After completing the setting, press the ¤ (HOME) [8]
button to return to the Home Screen.
Using the wired remote control
Press the function buttons (F1 – F4) on the wired remote
control to use the function assigned on the REMOTE screen.
Overview of mode functions
MODE
Function buttons
F1 F2 F3 F4
--- 1/2 [SOLO] 3/4 [SOLO]
INPUT VOL
+
INPUT VOL
-