Reference Guide

TASCAM DR-40X
9
2 – Names and Functions of Parts
Bottom Panel
; Built-in mono speaker
Use this built-in speaker to listen to recordings.
The speaker will not produce sound in the following situa-
tions.
i
When in recording standby
i
When recording
i
When in overdubbing mode
i
When headphones are connected
i
When the speaker output setting is off
z Mounting thread for tripod or tilt foot (1/4-inch)
Use this to attach a tripod or the included tilt foot to the
recorder.
CAUTION
i
Ensure the tripod or microphone stand screws are securely
fastened to prevent the unit from falling off.
i
When attaching this unit to a tripod or microphone stand,
be sure to place it on a level surface.
x Battery compartment cover
When not using the included tilt foot, it can be stored by
inserting it between the two protrusions on the inside of
the battery compartment cover.
c Hole for strap
Use this to attach a strap.
v Battery compartment
Install batteries (3 AA) in this compartment to power the
unit. (See "Using AA batteries" on page 16)