REFERENCE MANUAL

TASCAM DR-05 11
2–Names and Functions of Parts
Playback Control screen
The Playback Control screen is displayed if the PB
CONT button is pressed during playback or when
playback is stopped.
Recording cannot be performed while this screen is
displayed. Press the . or / button to skip to the
I/O point or the beginning/end, instead of the previous
or next le.
1 Loop playback status
The icon is displayed when loop playback is
enabled.
2 Playback speed
Playback speed as compared with the normal
speed is shown.
VSA shown on the left to indicate that the VSA
(variable speed audition: enables the tempo to be
changed without changing the pitch) function is
enabled.
3 Playback position display
The current playback position is shown by a bar. As
playback progresses, the bar extends to the right.
4 Loop playback IN (starting) and OUT
(ending) points
The set starting and ending points of the loop are
shown.
The icon appears at the playback position on
the bar when the starting point is set.
The icon appears at the playback position on
the bar when the ending point is set.
5 Available buttons
The buttons available in the Playback Control
screen are as follows.
MARK : Creates or deletes an IN or OUT point.
MENU : Switch over between ON and OFF status of
the loop playback function.
NOTE
Unlike the other screens, the QUICK button in this screen
works to display the quick menu containing only the
LEVEL ALIGN function, and no other functions will be
available.
Menu item list
This list provides an overview of the various menu
items.
Menu item Function Pages
REC SETTING
Recording mode settings 18
PLAY SETTING
Play area select, repeat
setting, playback equalizer,
jump-back settings
32,
36,
38,
39
BROWSE
microSD card le and folder
operations
30
SPEAKER
ON/OFF status of built-in
speaker
16
OTHERS OTHERS submenu display
Next
table
The OTHERS submenu appears when OTHERS is selected
in the MENU screen. The menu items contained are as
follows.
INFORMATION
Information about the le,
microSD card, and system
46
MONITOR MIX
Monitor Mix settings 22
TUNER
Tuner settings 44
EFFECT
Eect settings 43
FILE NAME
File name settings 48
DATE/TIME
Date and time settings 15
SYSTEM
Various system settings 47
CAUTION
• When recording or in recording standby, only the
following screens and items are shown.
REC SETTING screen: MIC POWER , LOW CUT and AUTO
REC items (AUTO REC setting cannot be changed)
MONITOR MIX screen: INPUT and PB INPUT items
(INPUT setting cannot be changed)
EFFECT screen: all items
• The MENU button is disabled in the Playback Control
screen, but works to change over between ON and OFF
status of the loop playback function. (See “Repeated
Playback of Selection (Loop Playback)” on page 37.)