REFERENCE MANUAL

TASCAM DR-05 43
8-Using the Effects
The DR-05 has built-in eects that can be applied
to the input signal during recording and practice.
They can also be applied to the output signal during
playback.
The icon appears as light letters on a dark
background.
Eects ON indication
Setting the effect
1 Press the MENU button to open the MENU screen.
2 Use the + or − button to select OTHERS , and press
the 7 button to open the OTHERS submenu.
3 Use the + or − button to select EFFECT , and press
the 7 button.
The EFFECT screen appears.
As shown in the above illustration, there are four
setting items on the EFFECT screen.
Set each item using the . or / buttons or +
or − buttons.
EFFECT :
Use this to turn the effect on or off.
The default setting is OFF .
PRESET :
See the “Effects Preset List” on page 43 for details
about the preset effects.
LEVEL :
Use this to change the output level of the preset
effect selected in the PRESET item.
Setting range: 0 - 20
SOURCE :
Use this to set whether the effect is applied to the
input signal ( INPUT ) or the output signal ( OUTPUT ).
The default setting is OUTPUT .
4 Use the + or − button to select the desired item
and press the 7 button or / button to access
that item’s settings.
5 Use the + or − button to set the desired value.
6 Press the . button when you are done
making the setting to return to item selection
status.
7 Press the ¤ (HOME) [8] button to return to
the Home screen.
CAUTION
When the sampling frequency is set to 96 kHz, or a WAV
file with a sampling frequency of 96 kHz is played, the
built-in effects do not work.
However, you can still set the built-in effects.
Effects Preset List
Preset name Eects
Hall 1 (Default)
This is a bright reverb modeled
after a large hall-like space.
Hall 2
This is a warm reverb modeled
after a large hall-like space.
Room
This reverb is modeled on a small
indoor space.
Studio
This reverb is modeled on a
studio-like space.
Plate 1
This is a bright plate reverb.
Plate 2
This is a warm plate reverb.