Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
100
TASCAM HS-20
10 – Internal settings
3 Event Type button
This shows the event type.
See the Event Type/Function list above for the meanings of
the icons.
4 Timer event function switch (ON/OFF)
This button turns the timer event function on/off.
Touch this button to turn it ON/OFF.
5 Current date and time
This shows the current date and time of the built-in clock.
6 Event on/off switches
Use these buttons to turn individual events on/off.
An event is on when its button has a check mark.
7 Target button
This shows the file/folder that will be affected by the event.
This shows the name of the file that will be played for a
playback/repeat playback event.
This shows the name of the file/folder that will be used for
download/delete & download events.
8 ALL button
Touch this button to make it active and show all set events.
9 Display filter button
o Touch this button to make it active and show only events
for the shown date.
o Touch this button to open a date selection pull-up menu.
When the pull-up menu is open, touch this again to close
it.
Display filter pull up menu
Date setting area
Touch these to highlight them
yellow. When highlighted,
you can use the DATA dial to
adjust them.
Touch this button to switch to
the previous day.
Touch this button to switch to
the previous day.
Touch this button to switch to
the next day.
Touch this button to switch to
the next day.
Touch this button to switch to
today's date.
0 MULTI SELECT button
Press this button to activate a mode that allows the selection
of multiple events.
q MENU button
o Touch this button to open a pull-up menu.
o When the pull-up menu is open, touch this again to close
it.
If a timer event has been edited, but not saved, a V icon
will appear on this button.
MENU button pull-up menu.
RELOAD button
Discard all changes and reload the timer event infor-
mation file.
SAVE button
Save the timer event information file to the media.
If a timer event has been edited, but not saved, a V icon
will appear on this button.
ADD button
Open the Timer Event Setup screen where you can edit a
new timer event.
EDIT button
Open the Timer Event Setup screen where you can edit
the selected timer event.
DELETE button
Touch this button to delete the selected timer event.
NOTE
•
Timer event functions are enabled only when in take mode.
•
A maximum of 100 events can be registered and executed.
•
For example, if 20 events that are each repeated 10 times
are registered, the total number of executed events would
be 200 (10 x 20). In order to keep the number of executed
events at 100 or less, only the first 10 events would be
executed. The latter 10 events would not be executed.
•
Events are automatically sorted by their starting time.
•
If there are two events at the same time, only the event
registered later in a list will be enabled.
•
Recording/repeat playback timer events will continue until
a stop timer event.
•
If the time of a recording/playback/repeat playback timer
event arrives during recording, recording will continue.
•
If the time of a recording/playback/repeat playback timer
event arrives during playback, that event will be executed.
•
If the time of a download timer event arrives during
recording/playback, recording/playback will continue
uninterrupted and the download event will be executed.
•
If the time of a recording/playback/repeat playback timer
event arrives during downloading, downloading will
continue uninterrupted and that event will be executed.
•
If a file downloaded by a download timer event has the
same name as a file in the current folder, it will overwrite
that file.
•
If the time of a delete & download timer event arrives during
recording/playback, recording/playback will continue