Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
![](/manual/tascam/hs-20/manual-english/images/img-102.png)
102
TASCAM HS-20
10 – Internal settings
o Daily
On the TIMER EVENT SETUP screen, select the Every Day
button to set the event to be executed every day.
Playback/repeat playback event screen
o Playback event screen
On the TIMER EVENT SETUP screen, touch the PLAY (y)
button to open the following screen.
Mode (time)
START TIME button: Set an event that starts playback of
the playback file at the set time.
END TIME button: Set an event that completes
playback of the playback file at the set time.
NOTE
The starting time of an event registered using END TIME will
be calculated with a time of zero if the playback file does not
exist in the current folder.
However, if a file is added through downloading, for
example, the file time will be applied.
Playback File
Touch this area to open the playback file selection
screen.
o Repeat playback event screen
On the TIMER EVENT SETUP screen, touch the PLAY
(·y) button to open the following screen.
The only difference with the playback event screen is
that there is no Mode section. The Time is always the
start time.
Playback file selection screen
On the playback events/repeat playback screen, touch
the Playback File button to open one of the following
three file selection screens.
SELECT TAKE screen
Select a file for playback from media loaded in the unit on
this screen.
FTP Server/Keyboard Screen selection buttons
FTP Server button: Press this button to open the
FTP Server BROWSE screen.
Keyboard Screen button: Press this button when
paused to open the INPUT
PLAYBACK FILE screen.
Playback files
Shows the playable files contained by the current folder.
SELECT buttons
Touch a SELECT (e) button on the SELECT TAKE screen
to set the corresponding file on the left side of this
screen as the playback file, and return to the Timer Event
Setup screen
FTP Server BROWSE screen
On this screen, you can select files on an FTP server by
name.
On this screen, you can set file names that have not yet
been downloaded to the media in the unit.
Take List/Keyboard Screen selection buttons
Take List button: Touch this to switch to the
SELECT TAKE screen.
Keyboard Screen button: Press this button when
paused to open the INPUT
PLAYBACK FILE screen.
File name list
This shows files on the FTP server.
Touch a file name to select it and highlight it yellow.
SELECT button
When a filename is selected, touch the SELECT (¸)
button to set the selected file as the playback file, and
return to the Timer Event Setup screen