Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
![](/manual/tascam/hs-20/manual-english/images/img-103.png)
TASCAM HS-20
103
10 – Internal settings
NOTE
On this screen, you can set Japanese names for files that
have not yet been downloaded to the media in the unit.
INPUT PLAYBACK FILE screen
On the screen, you can input the characters of playback
file names.
Take List/FTP Server selection buttons
Take List button: Touch this to switch to the SELECT
TAKE screen.
FTP Server button: Press this button to open the FTP
Server BROWSE screen.
Playback file input
o Touch the ENTER button to set the input file name as the
playback file name and return to the Timer Event screen.
o Even if ".wav"is not input, ".wav" will be automatically
added to the file name.
o If the filename exceeds the screen width, use the arrow
(<-/->) keys to move the cursor and scroll the name
left and right. When the left or right end is not being
displayed, "…" appears at that end.
Download event/Delete & download event screens
o Download event screen
Use this screen to download set folders/files from the
FTP server.
On the TIMER EVENT SETUP screen, touch the Down-load
(È) button to open the following screen.
o Delete & download event screen
After all audio files in the current folder are deleted, the
unit will download set folders/files from the FTP server.
On the TIMER EVENT SETUP screen, touch the Delete&DL
(È) button to open the following screen.
Download Target
This shows the path of the file/folder that will be
downloaded.
Touch this area to open the SELECT DOWNLOAD TARGET
screen.
NOTE
The download server is the server set on the FTP page of the
REMOTE SETUP screen.
SELECT DOWNLOAD TARGET screen
On the Download event/Delete & download event
screen touch the Download Target path to open one of
the following two download selection screens
FTP Server BROWSE screen
On this screen, you can select the path of a file/folder on
the FTP server.
Path name input screen button
Keyboard Screen button: Touch this to switch to the path
name input screen.
File/folder to be downloaded
This shows the names of files/folders on the FTP server.
Touch a file/folder name to select it and highlight it
yellow.
SELECT button
When a file/folder name is selected, touch the SELECT
(¸) button to set the selected file/folder path as the
file/folder to be downloaded, and return to the Timer
Event Setup screen.
If you press the SELECT (¸) button without selecting
anything, the currently shown folder path will be set for
download, and the Timer Event Setup screen will reopen
Path name input screen
On this screen, you can input the characters of path
names for download.