Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
120
TASCAM HS-20
16 – Messages
Message Meaning and response Note
Play Error
Buffer underrun
Data reading could not keep up during playback.
Play Error. An error occurred during playback.
Play Error.
nnn: NNNNNNNN
A playback error occurred with the take of the displayed number
and name.
nnn: take number
NNNNNNNN: take name
Playlist Import completed
but there are some wrong
entries.
Importing a playlist has completed, but there are some incorrect
entries.
<PlayList Info>
"ppppp"
Size: **MB
yyyy/mm/dd hh: mm
This shows playlist information. pppppppp: playlist name
Playlist Load completed
but there are some wrong
entries.
Loading a playlist has completed, but there are some incorrect
entries.
PLEASE CONFIRM
--- FULL FORMAT ---
FORMAT MM?
This will erase all DATA on card
Reconfirms that you want to full format the media MM: SD, CF, or USB flash drive
PLEASE CONFIRM
--- QUICK FORMAT ---
FORMAT MM?
This will erase all DATA on card
Reconfirms that you want to quick format the media MM: SD, CF, or USB flash drive
PLEASE CONFIRM
Copy MM to MM'?
This will erase all DATA on MM'.
Reconfirms that you want to copy all of MM to MM'
MM: SD, CF, or USB flash drive
MM': SD, CF, or USB flash drive
PLEASE CONFIRM
Delete this File?
"nnnnnnnn"
Reconfirms that you want to delete the selected file nnnnnnnn: name of a file to delete
PLEASE CONFIRM
Delete this Folder?
"nnnnnnnn"
Reconfirms that you want to delete the selected folder nnnnnnnn: name of a folder to delete
PLEASE CONFIRM
Delete N selected take?
Reconfirms that you want to delete the selected takes N: number selected
PLEASE CONFIRM
Export System Backup Data
to MM?
Reconfirms that you want to export system backup data to the
media.
MM: SD or CF
PLEASE CONFIRM
Import All System Backup Data
from MM?
Reconfirms that you want to import all system backup data from
the media.
MM: SD or CF
PLEASE CONFIRM
Load Factory Preset?
Reconfirms that you want to load the factory settings.
PLEASE CONFIRM
Remaining Rec Time is
less than N hour(s).
Delete already uploaded
takes?
Reconfirm.
The available recording time is less than N hours.
Delete the already uploaded takes.
N: set Auto SPACE Check remaining
time
--- QUICK FORMAT ---
FORMAT MM?
This will erase all DATA on card
Quick formatting will be performed. MM: SD, CF, or USB flash drive
--- QUICK FORMAT ---
Formatting MM ...
Quick formatting is occurring. MM: SD, CF, or USB flash drive
Reading DATA ... DATA is being read.
Reading Media ... The media is being read.
Rebuild all folders? This will rebuild all folders.
Rebuild changed Directory? This will rebuild the changed directory.
This message appears when you
operate a file on this unit via FTP or
on the BROWSE screen, and then
touch the REBUILD button with the
B mark.