Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
TASCAM HS-20
121
16 – Messages
Message Meaning and response Note
Rebuild current folder
and changed Directory?
This will rebuild the current folder and changed directory.
This message appears when you
operate a file on this unit via FTP or
on the BROWSE screen, and then
touch the REBUILD button with the
B mark.
Rebuild current folder? This will rebuild the current folder.
Rebuild failed Rebuilding failed.
Rebuild selected folder
and changed Directory?
This will rebuild the selected folder and changed directory.
This message appears when you
operate a file on this unit via FTP or
on the BROWSE screen, and then
touch the REBUILD button with the
B mark.
Rebuild selected folder? This will rebuild the selected folder.
Rebuilding All folder … All folders are being rebuilt.
Rebuilding folder … The folder is being rebuilt.
RECORD Error An error occurred during recording.
RECORD Error
Buffer overflow
The recording buffer became full during recording, and writing
to the media could not keep up.
.
RECORD stopped.
ABS time is over 24h.
The timeline mode’s ABS time exceeded 24 hours so recording
stopped.
RECORD stopped.
Media Full.
The media ran out of space, so recording stopped.
Redo Completed Redoing an edit has completed.
Reload Timer Event List? The timer event list will be reloaded.
Remaining Rec Time is
less than N hour(s).
Delete already uploaded
takes?
The available recording time is less than N hours.
Delete the already uploaded takes.
N: Auto SPACE Check set remaining
time
REMOTE/KEYBOARD Locked
The remote and keyboard connectors have been locked to
prevent misoperation.
Renaming folder
“pppppp”
to “nnnnnn”
The folder is being renamed.
ffffffff: old folder name
ffffffff: new folder name
Save changes in Current EDL
"ssssssss"
Is it okay to save changes to the current timeline?
ssssssss: name of AES31 editing infor-
mation file
Save changes in Current
Playlist “llllllll”
Save changes to the current playlist. llllllll: playlist name
Save changes in Timer Event
List?
Save changes to the timer event list .
Save Failed. Saving the file failed.
Saving File ...
Do not remove MM The file is being saved. Do not remove the media. MM: SD or CF
Screen Locked
LCD Section Locked
LCD section controls have been locked to prevent misoperation.
Screen Locked
Touch Panel Locked Out
The touch screen has been locked to prevent misoperation.
SD Card Locked The LOCK switch on the SD card has been engaged.
SD Card Locked
Cannot Record/Edit
Cannot record or edit as the SD card has been locked.
This message appears when a locked
SD card is inserted.
SD Media Full.
SD: Stopped.
CF: still RECORDING.
Recording to SD has stopped because the SD does not have
enough space.
Recording to CF is continuing.
Occurs when REC Mode is set to
Mirror.
SD Record Error.
SD: Stopped.
CF: still RECORDING.
Recording to SD has stopped because an error occurred.
Recording to CF is continuing.
Occurs when REC Mode is set to
Mirror.
Select Insert Position
[File T/C][Current Position]
Select a position where you want to insert a file between the file
T/C position and current position.
Select Paste Position
[File T/C][Current Position]
Select a position where you want to paste a file between the file
T/C position and current position.
Sort all takes? Sort all the takes.
Take Copy failed. Failed to copy the take.
Take Delete failed. Failed to delete the take.