Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
![](/manual/tascam/hs-20/manual-english/images/img-60.png)
60
TASCAM HS-20
8 – Take mode
3. Touch the EXPORT button on the pull-up menu to open the
following pop-up window. Touch the OK button or press the
DATA dial to export the selected take.
Touch the CANCEL button on the pop-up window to return
to the take list screen.
NOTE
•
If the target destination is empty (does not have a current
folder), the same folder structure as the source folder is
created there automatically during the export.
•
If the target destination contains a file with the same name,
a pop-up window stating “Selected Take Already exist in
Export destination.” appears and exporting does not occur.
•
When the total size of the EXPORT file exceeds the free space
in the export destination, a pop-up window stating “Cannot
EXPORT. Not enough space on xxx”* is shown before the
export starts, and exporting does not occur.
*xxx: SD/CF card(export destination media name)
Uploading takes to an FTP server
This unit can upload takes to a designated folder on the FTP
server set on the FTP page of the REMOTE SETUP screen.
1. Select a take you want to upload on the take selection
screen.
2. Touch the MENU button on the take selection screen to
open the pull-up menu.
3. Touch the UPLOAD to FTP button on the pull-up menu to
open a confirmation pop-up window. Touch the OK button
or press the DATA dial to upload the selected take.
Touch the CANCEL button on the pop-up window to return
to the take list screen.
NOTE
The file icon for a take that has been successfully uploaded
is shown like this: .
The file icon for a take that has failed to upload is shown like
this: .
Deleting a take
1. Select the take that you want to delete on the take selection
screen.
2. Touch the MENU button on the take selection screen to
open the pull-up menu.
Take selection screen with pull-up menu open
3. Touch the DELETE button on the pull-up menu.
4. Touch the OK button or press the DATA dial when the confir-
mation message is displayed on the pop-up window.
Confirmation message screen
5 Touch the OK button or press the DATA dial when the recon-
firmation message is displayed on the pop-up window.
Reconfirmation message screen
During deletion, a progress bar is shown in a pop-up
window.
When deleting completes, the pop-up window will
disappear.
CAUTION
You can delete a take already in use in the timeline mode or
playlist mode.
If you delete such a folder/file, an error pop-up appears
when you attempt to play the corresponding region/entry.