Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
![](/manual/tascam/hs-20/manual-english/images/img-66.png)
66
TASCAM HS-20
9 – Playlist mode
4. When a confirmation message pop-up appears, touch the
OK button or press the DATA dial to confirm the playlist
name.
While the playlist is being created, a progress status pop-up
appears.
When playlist creation completes, the pop-up disappears.
NOTE
•
Immediately after a new playlist is created, it becomes the
current playlist (currently loaded playlist).
•
A new playlist can also be created by touching the CREATE
PLAYLIST button on the pull-down menu that appears when
an entry name button is touched on the Home Screen.
•
“C” (current) appears inside the icon of the currently
loaded playlist.
Changing a playlist name later
You can change playlist names later.
1. Press the FILE LIST key on the front of the unit to open the
playlist selection screen.
2. Select the playlist with the name that you want to change.
The background of the selected playlist name appears
yellow.
3. Touch the MENU button to open a pull-up menu.
4. Touch the EDIT NAME button in the pull-up menu to open
the PLAYLIST NAME screen.
NOTE
The EDIT NAME button in the pull-up menu cannot be
selected if the loaded playlist is selected.
5. Input the playlist name. Follow the procedures “Editing the
name of a folder in the root directory” on page 33.
6. Touch the Enter button on the PLAYLIST NAME screen or
press the DATA dial to confirm the playlist name and return
to the playlist selection screen.