Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
70
TASCAM HS-20
9 – Playlist mode
Assigning a take to an entry
1 Press the HOME key on the front panel to open the Home
Screen.
2 Touch a file name or title name button to open a pull-down
menu and touch the ASSIGN FILE button.
Touch the t ASSIGN part to open the ASSIGN file screen.
On the left side are the buttons that can receive assign-
ments, and on the right side is the list of takes that can be
assigned.
NOTE
You can also touch the t ASSIGN button on the ENTRY List
screen to open the ASSIGN File screen.
3. First, select the key assign button of the take that you want
to assign.
4. Use the + and – buttons to open the page where you want
to assign a file.
5. In the key assign button list on the left, select the one
to which you want to assign a take. The selected button
appears light blue.
NOTE
If you select a button that already has an entry assigned to
it, the corresponding take appears yellow in the take list.
6. Touch a take name in the take list to assign that take to that
button. When a take is assigned to a button, the button’s
icon changes from (no assignment) to .
NOTE
•
Only takes in the folder where the playlist is can be added to
the playlist.
•
If the take that you want to add does not appear, use the
scroll buttons or DATA dial to scroll through the list until the
take appears and then touch its name.
TIP
If the take that you want to add is in a different folder, touch
the current folder name button to open the folder list. Then,
touch the name of the folder that contains the take that you
want to add to open that folder’s take name list.
7. Repeat steps 3–6 as necessary.
8. After you have completed making assignments, save the
playlist as necessary.
To save a playlist, touch the MENU button on the ASSIGN file
or ENTRY list screen to open a pull-up menu. Touch the SAVE
button. You can also touch a file name or title name button
on the Home Screen to open a pull-down menu and touch
the SAVE button.
For details about saving, see “Saving playlists” on page 75.
TIP
You can also assign a take to an entry with a similar
procedure on the Entry List screen.
CAUTION
If you do not save the playlist, all changes will be lost when
another playlist is loaded, the card is removed or the unit's
power is turned off.
Entry number page allocation
The playlist entry numbers are allocated as follows.
Page number Entry number
1 1-20
2 21-40
3 41-60
4 61-80
5 81-100