Manual
Table Of Contents
- 1 – Introduction
- 2 – Names and functions of parts
- 3 – Preparation
- 4 – Basic operation
- 5 – FILE LIST
- 6 – Overview of operation modes
- 7 – Timeline mode
- Preparing to record
- Recording in timeline mode
- Playback in timeline mode
- Reading, saving and creating AES31 editing information
- Editing the timeline
- Selecting the range to copy/cut/delete
- Setting the editing start point
- Setting the editing end point
- Clearing the editing start/end points
- Selecting a complete region for editing
- Copying the data in the selection (Copy)
- Cutting the data in the selection (Cut)
- Erasing the data in the selection (Erase)
- Dividing the data at the set position (Divide)
- Inserting the data of the copy buffer at the set position (Insert)
- Inserting a selected file into the set position (Insert File)
- Inserting silence at the set position (Insert Mute)
- Pasting the copy buffer data at the set position (Paste)
- Pasting the data of a selected file into the set position (Paste File)
- Setting fades for the designated region (Fade IN/FadeOut)
- Removing set fades (Remove Fade IN/Remove FadeOut)
- Setting the playback level in the selected region (Level)
- Undoing the previous edit (UNDO)
- Redoing an edit (REDO)
- Bouncing
- 8 – Take mode
- 9 – Playlist mode
- Playlist operations
- Editing a playlist (adding, clearing and editing entries)
- ENTRY list screen
- ASSIGN File screen
- Assigning a take to an entry
- Entry number page allocation
- Clearing entry assignments
- Editing entry titles
- Editing the playback starting and ending points
- Editing the playback Start/End point using the number buttons and mark list screen
- Editing the playback starting time
- Editing fade-in/fade-out length and level
- Rehearsal playback
- Saving playlists
- Naming a playlist and saving it
- Playback in playlist mode
- 10 – Internal settings
- Menu screen
- Recording settings (REC SETUP)
- Playback settings (PLAY SETUP)
- Sync and timecode settings (SYNC T/C)
- Remote settings (REMOTE SETUP)
- Audio Signal Input and Output settings (AUDIO I/O)
- Level meter settings (METER SETUP)
- System settings (SYSTEM SETUP)
- Version information (VERSION INFO)
- Viewing and working with folders and files (BROWSE)
- Managing media (MEDIA MANAGE)
- TIMER EVENT LIST screen
- TIMER EVENT SETUP screen
- Operation mode selection (OPERATION MODE)
- 11 – Mark and locate functions
- 12 – Other functions
- 13 – Operation with timecode synchronization
- 14 – Loading files recorded on another device
- 15 – Troubleshooting
- 16 – Messages
- 17 – Specifications
92
TASCAM HS-20
10 – Internal settings
ANALOG Ref LVL ADJUST page
Use these to adjust the analog input and output reference levels
of each channel.
Use “IN x” to adjust the analog input level, and use “OUT x” to
adjust the analog output level (“x” is L or R).
Touch a knob to select it, making the background yellow, and
turn the DATA dial to set the level.
Turn the DATA dial to change it in 0.1dB increments, or press
and turn it to change it in 1dB increments. The values appear
beneath each knob.
Range: −6dB to +6dB (default value: 0dB)
If an analog input has not been set, a knob will not be shown
and “Analog IN not selected” will appear in the meter area.
System setting backup and preset functions
You can import/export system files and load factory settings
using the Backup/Preset page of the SYSTEM SETUP screen.
System Backup
o You can write System Backup data to the selected card
using the Export button.
o You can read System Backup data on the selected card
using the Import button and write it to the built-in
memory.
If there are no System Backup files, a pop-up window
indicating that the import cannot be performed is shown.
Load Factory Preset
Touch the Load button to load Factory Preset data (the
setting values when shipped from the factory).
TC Chase Backup
Use to set whether or not the TC Chase setting is backed up.
Setting buttons
o Disable (default): The TC Chase setting is not backed
up. Every time the unit is turned
on, TC Chase will be set to OFF.
o Enable: The TC Chase setting is backed up.
The TC Chase setting in use before
the unit was turned off will be
restored when it is turned on
CLOCK ADJUST page
Set the time of the built-in clock.
Touch the item that you want to set, and use the DATA dial to
adjust the item. (See “Setting the time of the built-in clock” on
page 24.)
Touch the SET button on the CLOCK ADJUST page or press the
DATA dial to confirm the setting.
NOTE
While setting the time, the clock stops and the “:” does not
blink.
When you touch the SET button, the clock starts again and
the “:” blinks.
DAYLIGHT SAVING button
Touch to open the DAYLIGHT SAVING TIME SETUP page.
SNTP SETUP button
Touch to open the SNTP SETUP screen.