MiniDisc Player User Manual

TASCAM MD-02/MD-02B 35
Troubleshooting
The power does not come on.
ª
Is the power plug completely connected?
“Disc Error!” or “Mecha Error!” appears on
ª
the display.
The disc might be dirty. Change the disc.
"System Err!" appears on the screen.
ª
The MD deck could be malfunctioning. Please contact a
TEAC service center.
The unit cannot play a disc.
ª
Is there condensation?
If there is condensation, eject the disc, turn the power OFF
and wait several hours.
There is no sound.
ª
Confirm the connections with the audio system.
•
Check the volume and the amplifier settings.
•
Cannot record to a disc.
ª
If the MD is write-protected, slide the write-protection
•
tab.
Confirm connections with connected equipment again.
•
Adjust the recording level.
•
MDs that are only for playback cannot be recorded.
•
Load a recordable MD.
If the MD remaining time is insufficient, erase unneces-
•
sary tracks or change the MD.
Confirm the audio system settings.
•
Even though I changed a setting, it has not
ª
been saved.
This unit backs up mode settings every time they are
changed. If the power is turned OFF too quickly after a
setting is made, the setting might not be saved.
I hear noise.
ª
Locate the unit far from televisions and other devices with
strong magnets.
11 − Messages & Troubleshooting