Users Manual Part 1

44
TASCAM Model 16
7 - Track editing
Stereo mix export function
MAIN MIX L/R bus recording files (mono) can be converted to a
single stereo file.
Converted stereo files are saved in the “MUSIC” folder.
Saved files are named according to the song name. For example,
the file name will be “292339`1113`3.NJY`12/xbw” if the song
name is “292339`1113”.
If the size of the converted file would exceed 2 GB, multiple files
will be created with numbers like “13” and “14” at their ends.
1. Load the song to be exported as a stereo mix in advance.
For details about loading songs, see “Loading Songs” on
page 34.
2. When the recorder is stopped, open the NFOV screen and
select the TUFSFP!NJY!FYQPSU item.
For details about menu operation, see “Menu operation
procedures” on page 28.
3. Press the MULTI JOG dial to open the TUFSFP!NJY!FYQPSU
screen.
4. Press the F4 button to start conversion.
NOTE
i If a converted file already exists, a message to confirm
overriding appears.
Press the F3 button to delete the existing file and
start conversion. This operation cannot be undone.
i Conversion is not possible if no MAIN MIX L/R bus file has
been recorded. The message shown below will appear.
i During conversion, press the F1 button to cancel
conversion. A file with the part converted before canceling
will remain.
5. When conversion completes, the NFOV Screen will reopen.
NOTE
Converted files can be played using this unit’s SD PLAY
mode. For details about playback with the SD PLAY mode,
see “Playing WAV files on SD cards (SD PLAY mode)” on page
48.