D00998301A » MP-BT1 MP3 Bass Trainer This device has a serial number located on the rear panel. Please record it and retain it for your records.
IMPORTANT SAFETY PRECAUTIONS FOR U.S.A. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. T h e l i g h t n i n g f l a s h w i t h a r ro w h e a d symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS 1 2 3 4 5 6 7 8 9 10 11 12 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
SAFETY INFORMATION For China TASCAM MP-BT1
Table of Contents 1–Introduction................................................... 6 4–Playing bass with the MP-BT1............15 Warnings about the rechargeable battery............ 6 Getting detailed usage of the MP-BT1.................. 7 About this manual................................................. 8 About the power supply........................................ 8 Reset hole.............................................................. 9 Connecting a bass.........................................
1–Introduction Thank you for purchasing the TASCAM MP-BT1. This unit is ideal for use when practicing bass. If you run into a phrase on a recording that is too difficult for you to learn by ear at ordinary speed, you can play and loop the music at a slower speed to study the part. Furthermore, the dedicated bass input allows you to use the unit’s built-in effects as you play along with the music. You can also transfer music easily from a computer to the MP-BT1.
1–Introduction ment, unit inspection or repair. When you dispose of the unit, however, please follow the procedures in the Owner’s Manual to remove and recycle the internal battery. • Do not touch leaking fluid with bare skin if the rechargeable battery leaks. Battery fluid may cause loss of eyesight if it gets in an eye. Wash the eye (do not rub) with clean water immediately and contact a physician as soon as possible.
1–Introduction About this manual When we refer to a key or connector or control on the MP-BT1, the typeface looks like this: PLAY. When we refer to items shown on the display, the typeface looks like this: MENU. About the power supply The MP-BT1 uses a built-in lithium ion battery that can be recharged by connecting the unit to a computer with the USB cable. You can also use an AC adapter (sold separately) to power the unit and recharge the battery.
1–Introduction Reset hole If the MP-BT1 starts to operate incorrectly, insert the end of a paper clip or similar object into this hole to press the System Reset Button inside. Pressing this button turns the power OFF. NOTE Do not press the System Reset Button if the unit is operating normally.
2–Preparing tracks The following sections explain how to copy tracks from a CD to a computer and then transfer them to the MP-BT1. Copying tracks to a computer Use a computer application that is capable of importing CD tracks as MP3s (e.g. iTunes) to import the tracks that you want from a CD to a computer. For detailed information about how to do this, please refer to the manuals and/or on-line help files of the computer and application.
2–Preparing tracks Connecting to a computer To transfer music files stored on a computer to the MP-BT1, use the included USB cable to connect the USB port on the unit to a computer USB port. “ USB connected…” appears on the MP-BT1 screen. On the computer, you should find the unit shown as an external drive named “MP-BT1.” Copying tracks from a computer 1. Click on the “MP-BT1” drive icon on the computer to open it. You see two folders: UTILITY and MUSIC. 2.
3–Playing back tracks WARNING Before starting playback, turn the OUTPUT VOLUME all the way down. Turn it up gradually to reach the desired volume. Excessive volume can damage speakers and permanently harm your hearing. Preparing to listen Connect headphones or a monitoring system (an amp with built-in speakers, a home stereo, etc.) using the /LINE OUT jack. Playing back tracks on the MP-BT1 Press the Á/π key to start playback. Press the Á/π key again to stop playback.
3–Playing back tracks TIP From the MENU screen, use the BROWSE and PLAYLIST screens to select tracks directly and choose your favorite tracks. Changing the playback tempo You can change the speed of playback, which is useful to practice difficult riffs, for example. 1. Press the MENU key to open the MENU screen. 2. Use the wheel to select PB CONTROL . Press the ENTER key to open the PB CONTROL screen. TIP If the home screen is open, press the ENTER key to open the PB CONTROL screen directly. 3.
3–Playing back tracks Looping a selected passage 1. Press the Á/π key to start playback. 2. Press the I/O key at the point where you want the loop to start (IN point). 3. Press the I/O key again at the point where you want the loop to stop (OUT point). Loop playback starts immediately from the IN point. To stop loop playback press either the LOOP key or the I/O key. If you press the LOOP key, the loop IN and OUT points are kept, so you can play the same loop if you press the LOOP key again.
4–Playing bass with the MP-BT1 You can connect a bass and mix your bass playing with the track you are playing back. Connecting a bass Practicing with tracks as they play If you play bass while a track is playing back, you can hear the combined signals of the bass and the track output through the /LINE OUT jack. 1. Connect a bass to the BASS IN jack. 2. Adjust the bass volume with the INPUT dial.
4–Playing bass with the MP-BT1 Using the built-in effects The MP-BT1 has built-in bass effects. 1. Press the FX key to open the EFFECT screen. 2. Use the wheel to select BANK and press the ENTER key. 3. Use the wheel to choose a bank and press the MENU key. 16 TASCAM MP-BT1 You can see the name of the factory effect currently selected in the PRESET display directory below. NOTE OFF bypasses the effect. 4. Use the wheel to select PRESET and press the ENTER key. 5.
Notes 17 TASCAM MP-BT1
Notes 18 TASCAM MP-BT1
Notes 19 TASCAM MP-BT1
» MP-BT1 TEAC CORPORATION Phone: +81-422-52-5082 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan www.tascam.com TEAC AMERICA, INC. Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 www.tascam.com TEAC CANADA LTD. Phone: +1905-890-8008 Facsimile: +1905-890-9888 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada www.tascam.com TEAC MEXICO, S.A. De C.V Phone: +52-555-581-5500 Campesinos No.
