User's Manual

4 – Routing & assignment : Monitoring
54 TASCAM DM-3200 User’s Manual
Monitoring
The DM-3200 provides comprehensive monitoring
and metering facilities allowing both control room
and studio cue mixes to be produced.
This section describes the monitoring procedures and
setup when working in stereo. When working with
surround mixes, there are obviously some important
differences, and these are described in “Surround
operations” on page 75.
Selecting the CR source
The four dedicated keys and indicators to the right of
the meters allow instant switching of the control
room monitor sources and the two
PHONES outputs,
which mirror the output from the control room moni-
tor outputs.
The first key is hard-wired to the stereo buss
(
STEREO) and cannot be changed.
The next three keys, in order, default to the aux 1–2
sends (typically used for studio cue), digital input 1
(e.g. a stereo recorder) and the analog 2-track inputs
(again, this could be a stereo master recorder).
Figure 4.9: Monitoring and metering controls