Reference Manual

10
TASCAM SERIES 102i / SERIES 208i
4 - Preparation
Connecting the power
Use the included AC adapter (PS-P1220E) to connect a power
supply to the unit as shown below.
Power outlet
DC plug
PS-P1220E (included)
In order to prevent the cord from becoming disconnected
during use, wrap it around the cord holder when connecting it.
ATTENTION
Always use the AC adapter (PS-P1220E) that was shipped
with the unit. Using a different AC adapter could cause
malfunction, overheating, fire or other problems.
NOTE
The AC adapter for the unit includes 4 types of outlet plugs.
Attach the type of plug that matches the power outlet that
you are using. (see “Changing the outlet plug” on page 10)
Changing the outlet plug
NOTE
When purchased new, the included PS-P1220E AC adapter
for the unit has an outlet plug (A) already attached. There
should be no need to change the plug.
1. Move the knob (1) on the PS-P1220E AC adapter in the
direction of the arrow and remove the plug (A).
2. Select the plug that matches the AC outlet from the 3 other
types included (B, C or D).
3. Move the knob (1) in the direction of the arrow again, and
attach the plug to the AC adapter.
This completes changing the outlet plug.
After changing the outlet plug, confirm that it is not loose or
crooked and that everything is normal before plugging it into an
outlet.
ATTENTION
Do not use the adapter if there is anything abnormal about
the plug after changing it. Use when the plug is abnormal
could cause fire or electric shock. Contact the retailer where
you purchased the unit or a TEAC service center (on the back
cover) to request repair.