Reference Manual

26
TASCAM SERIES 102i / SERIES 208i
5 - Using the Settings Panel
Resetting all scene memories
You can reset the 10 scene memories to the default values.
ATTENTION
After resetting, you cannot restore the previous settings.
1. In the menu bar, open the “SceneMemory” menu, and click
“Initialize Memory”.
Windows version
Mac version
2. The following confirmation message, which explains that all
scene memories will be reset, will appear.
Windows version
3. Click the OK button to reset all the scene memories.
NOTE
Click the “Cancel” button to return to the previous screen
without resetting the 10 scene memories.
Saving Settings Panel settings to the unit
You can transfer the current Settings Panel settings to the unit.
1. In the menu bar, open the “SceneMemory” menu, and click
“Save into the unit”.
Windows version
Mac version
2. The following confirmation message, which explains that all
the current Settings Panel settings will be saved to the unit,
will appear.
Windows version
3. Click the “OK” button on the screen to save all the current
Settings Panel settings to the unit memory.
NOTE
The Buffer Size item on the INFORMATION page is not saved.