Reference Manual

TASCAM SERIES 102i / SERIES 208i
7
3 - Installation
Installing the dedicated software
To use this unit, a dedicated software must be installed on a
computer.
The dedicated software might be updated at any time.
Download the latest software for the operating system you are
using from the TEAC Global Site (http://teac-global.com/).
o On a Windows computer, this will install the Windows driver
and Settings Panel application.
o Installing the dedicated software on a Mac will install only
the Mac Settings Panel application. The standard OS driver
will be used.
o With an iOS device, the standard OS driver will be used, so
there is no need to install any.
ATTENTION
Before starting to install software, quit other applications.
Installing the Windows dedicated software
Follow the procedures below to install the Windows dedicated
software.
ATTENTION
i Complete installation of the Windows dedicated software on
the computer before connecting the unit to it with the USB
cable.
i If you connected the unit to the computer using the USB
cable before installing the Windows dedicated software
and the “Found New Hardware Wizard” launched, close the
Wizard and disconnect the USB cable.
Windows dedicated software installation
procedures
1. Download the latest Windows dedicated software for the
operating system you are using from the TEAC Global Site
(http://teac-global.com/) and save it on the computer to
be used with the unit.
2. Uncompress the saved software (zip file) on the computer
desktop or another location.
3. Double-click the “TASCAM_SERIES_102i_208i_Installer_x.
xx.exe” (x.xx is the version number) file in the folder that
appears after uncompression to automatically launch the
installation software.
ATTENTION
If you open a zip file without decompressing it and
doubleclick the “TASCAM_SERIES_102i_208i_Installer_x.
xx.exe” file in the folder that opens, installation will not start.
Right-click the zip file and select “Extract All”, for example, to
decompress it and then try again.
4. Depending on the computer set up, a “Security Warning” or
“User Account Control” screens might appear. If this occurs,
click the “Yes” button.
5. Read the contents of the License Agreement, and select “I
accept the agreement” if you agree to the terms.
Then, click the “Next” button.
6. Next, click the “Install” button.
7. When the Windows security screen appears, click the
“Install” button to start installation.
8. The following screen appears when installation has
completed.
Click the “Finish” button.
The installer will quit and the Windows Settings Panel will
launch.
NOTE
The first time you connect the unit by USB to the computer
after installing the software, installation of the device driver
will be executed. Some time might be necessary before
the unit is recognized because Windows Update will be
automatically searched at this time. If the unit is still not
recognized after a while, open the software installation
screen from the notification area at the bottom right of the
computer display, and click “Skip obtaining driver software
from Windows Update” to stop the search.