Solid State Stereo Audio Recorder Owner's Manual
Table Of Contents
- Contents
- 1 − Introduction
- 2 − Controls and connectors
- 3 − Menu screens
- 4 − Preparations
- 5 − Playback
- Files that can be played
- Play area
- Basic playback operations
- Selecting a track
- Fast-forward/rewind search
- Time search
- Time skip
- Playback modes
- Program play
- Switching the playback time display mode
- Power-on play
- Repeat play
- Pitch Control play
- Key Control play
- Auto Cue function
- Auto Ready function
- Call function
- Incremental Play function
- Playing in monaural
- Resume Playback
- Flash Start function
- End of disc/track message (EOM)
- 6 − Recording
- Selecting the input source
- Specifying the recording file format
- Using the sampling rate converter
- Monitoring the input signal
- Adjusting the input signal level and balance
- Basic recording operation
- Switching the recording time display mode
- Sync recording
- Sync Record operation
- Auto Track function
- Assigning a new track number manually
- Applying the compressor while recording
- Specifying the name of the recorded file
- 7 − Using the folder finder
- 8 − Using the playlist finder
- 9 − Other settings
- 10 − Operation using a computer keyboard
- 11 − Using the RS-232C connector
- 12 − Messages
- 13 − Troubleshooting
- 14 − Specifications
4 − Preparations
TASCAM SS-R1 19
Adjusting the display
If necessary, you can adjust the display contrast and brightness.
Adjusting the contrast
While holding down the DISPLAY (INFO) key, turn the
MULTI JOG dial (or use the remote’s LCD +/- keys) to
adjust the contrast of the SS-R1’s display.
DISPLAY (INFO) key
MULTI JOG dial
LCD (+/–) ke
y
Adjusting the brightness
You can use the UTILITY menu item LCD BRIGHTNESS
to adjust the brightness of the backlight.
1 Press the MENU key to access the main menu list.
2 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight
UTILITY, and press the front panel MULTI JOG
dial or ˚ key (or the remote’s ENTER key or
CURSOR ¥ key).
3 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight LCD
BRIGHTNESS, and press the front panel MULTI
JOG dial or ˚ key (or the remote’s ENTER key or
CURSOR ¥ key).
4 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to adjust the
brightness.