Solid State Stereo Audio Recorder Owner's Manual
Table Of Contents
- Contents
- 1 − Introduction
- 2 − Controls and connectors
- 3 − Menu screens
- 4 − Preparations
- 5 − Playback
- Files that can be played
- Play area
- Basic playback operations
- Selecting a track
- Fast-forward/rewind search
- Time search
- Time skip
- Playback modes
- Program play
- Switching the playback time display mode
- Power-on play
- Repeat play
- Pitch Control play
- Key Control play
- Auto Cue function
- Auto Ready function
- Call function
- Incremental Play function
- Playing in monaural
- Resume Playback
- Flash Start function
- End of disc/track message (EOM)
- 6 − Recording
- Selecting the input source
- Specifying the recording file format
- Using the sampling rate converter
- Monitoring the input signal
- Adjusting the input signal level and balance
- Basic recording operation
- Switching the recording time display mode
- Sync recording
- Sync Record operation
- Auto Track function
- Assigning a new track number manually
- Applying the compressor while recording
- Specifying the name of the recorded file
- 7 − Using the folder finder
- 8 − Using the playlist finder
- 9 − Other settings
- 10 − Operation using a computer keyboard
- 11 − Using the RS-232C connector
- 12 − Messages
- 13 − Troubleshooting
- 14 − Specifications
5 − Playback
26 TASCAM SS-R1
Pitch Control playback
The SS-R1 can modify the pitch (the pitch and playback
speed) of the playback (Pitch Control playback).
Here is how to use Pitch Control playback.
1 Press the front panel PITCH knob (or the remote’s
PITCH key) to turn on Pitch Control playback.
When this is on, the PITCH indicator in the display will
light in the home screen.
2 Turn the PITCH knob (or use the remote’s PITCH
+/- keys) to specify the pitch.
While you’re making this setting, the display’s pitch
control value is shown as PITCH LVL XXX%
.
You can specify the pitch in a range of -16.0–+16.0.
To turn off Pitch Control playback:
Press the front panel PITCH knob (or the remote’s
PITCH key).
The PITCH indicator in the display will go dark, and
Pitch Control playback will turn off. Even if Pitch
Control playback is off, the pitch you specified in step 2
above is remembered, and will be valid if you turn
Pitch Control on once again.
•
Repeat playback
You can repeatedly play back all tracks in the play area, or
repeatedly play back a specified region within a track (A-B
Repeat playback).
Conventional repeat playback
If you press the remote’s REPEAT key to turn Repeat play-
back on, all tracks in the play area will play repeatedly (to
do this on the SS-R1 itself, use menu mode).
NOTE
You can use the PLAY menu item REPEAT to turn on
Repeat playback from the SS-R1 itself.
REPEAT will light in the display.
In this state, all tracks in the play area can be played back
repeatedly.
If you turn on Repeat playback during playback, playback
will continue, and when it reaches the end of the play area,
it will return to the beginning and continue playing. If you
turn on repeat playback while stopped, repeat playback
will begin when you press the PLAY key.
To turn off repeat playback, press the remote’s REPEAT
key once again (or turn the PLAY menu item REPEAT to
the OFF setting).
The REPEAT indicator in the display will go dark.
NOTE
By using repeat playback in conjunction with Single
playback, Program playback, or Random playback,
you can repeat a single song, repeat a program, or
repeat random playback.
The repeat function on/off setting is remembered
even when the power is off.
•
•
A-B Repeat playback
This lets you specify a desired region (A-B) within a track
that will be played back repeatedly.
1 While playing or stopped, press the remote’s A-B
key at the starting point (A) of the region that you
want to repeat.
In the home screen, the REPEAT and A- indicators will
blink.
NOTE
If you press the REPEAT key, the repeat play starting
point (A) will be cancelled, and REPEAT and A- will go
dark.
2 Once again, press the remote’s A-B key at the
ending point (B) of the region that you want to
repeat. If you cancel during playback, playback
will continue past the point specified as the end-
ing point of A-B repeat playback.
NOTE
If you press the STOP key to stop playback, the
specified region (A-B) will be cleared.
You can’t specify A-B repeat playback across tracks.
In the home screen, A-B will light (in addition to REPEAT).
The region (A-B) has now been specified, and A-B
repeat playback will begin.
To turn off A-B Repeat playback:
Press the remote’s A-B key or the REPEAT key.
In the home screen, the REPEAT indicator and the A-B
indicator will go dark, and A-B repeat playback will be
cancelled.
•
•
•