Solid State Stereo Audio Recorder Owner's Manual
Table Of Contents
- Contents
- 1 − Introduction
- 2 − Controls and connectors
- 3 − Menu screens
- 4 − Preparations
- 5 − Playback
- Files that can be played
- Play area
- Basic playback operations
- Selecting a track
- Fast-forward/rewind search
- Time search
- Time skip
- Playback modes
- Program play
- Switching the playback time display mode
- Power-on play
- Repeat play
- Pitch Control play
- Key Control play
- Auto Cue function
- Auto Ready function
- Call function
- Incremental Play function
- Playing in monaural
- Resume Playback
- Flash Start function
- End of disc/track message (EOM)
- 6 − Recording
- Selecting the input source
- Specifying the recording file format
- Using the sampling rate converter
- Monitoring the input signal
- Adjusting the input signal level and balance
- Basic recording operation
- Switching the recording time display mode
- Sync recording
- Sync Record operation
- Auto Track function
- Assigning a new track number manually
- Applying the compressor while recording
- Specifying the name of the recorded file
- 7 − Using the folder finder
- 8 − Using the playlist finder
- 9 − Other settings
- 10 − Operation using a computer keyboard
- 11 − Using the RS-232C connector
- 12 − Messages
- 13 − Troubleshooting
- 14 − Specifications
7 − Using the folder finder
TASCAM SS-R1 53
Undoing a file menu operation (UNDO)
Of the file menu operations, Divide, Combine, and Delete
operations can be undone immediately after you’ve execut-
ed the operation.
This is possible only if the play mode is set to consecutive
playback (CONTINUE).
NOTE
When performing the Undo operation, it does not
matter which file is selected in the folder finder
screen when you open the file menu screen.
1 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight
UNDO.
A confirmation screen will appear.
The example screen above is when the DIVIDE opera-
tion will be undone.
2 Press the front panel MULTI JOG dial (or the
remote’s ENTER key).
The Undo operation (UNDO) will be executed, and you
will return to the folder finder screen. At this time, the
folder/file to which the Undo operation applied will be
highlighted.
NOTE
If you decide not to perform the Undo operation
(UNDO), press the front panel TIME (ESC) key (or the
remote’s CLR/ESC key).
NOTE
If there is no file operation that can be undone, the
display will indicate CAN
,
T UNDO
.
Moving or copying a file
You can move a file within a folder, or move or copy a file
to another folder. These operations are performed in the
folder finder screen. (There is no need for you to enter the
file menu screen).
Moving a file within a folder
1 In the folder finder screen, use the front panel
∆ , ˚ keys (or the remote’s CURSOR ˙ , ¥
keys) to access the finder screen for the folder
that contains the file you want to move.
2 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight the
file that you want to move.
3 Press and hold the front panel MULTI JOG dial (or
the remote’s ENTER key).
The file to be moved will blink.
4 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to move the file to
the desired location.
5 Press the front panel MULTI JOG dial (or the
remote’s ENTER key).
The MOVE popup will appear, and the Move operation
will be confirmed.