Solid State Stereo Audio Recorder Owner's Manual
Table Of Contents
- Contents
- 1 − Introduction
- 2 − Controls and connectors
- 3 − Menu screens
- 4 − Preparations
- 5 − Playback
- Files that can be played
- Play area
- Basic playback operations
- Selecting a track
- Fast-forward/rewind search
- Time search
- Time skip
- Playback modes
- Program play
- Switching the playback time display mode
- Power-on play
- Repeat play
- Pitch Control play
- Key Control play
- Auto Cue function
- Auto Ready function
- Call function
- Incremental Play function
- Playing in monaural
- Resume Playback
- Flash Start function
- End of disc/track message (EOM)
- 6 − Recording
- Selecting the input source
- Specifying the recording file format
- Using the sampling rate converter
- Monitoring the input signal
- Adjusting the input signal level and balance
- Basic recording operation
- Switching the recording time display mode
- Sync recording
- Sync Record operation
- Auto Track function
- Assigning a new track number manually
- Applying the compressor while recording
- Specifying the name of the recorded file
- 7 − Using the folder finder
- 8 − Using the playlist finder
- 9 − Other settings
- 10 − Operation using a computer keyboard
- 11 − Using the RS-232C connector
- 12 − Messages
- 13 − Troubleshooting
- 14 − Specifications
8 − Using the playlist finder
TASCAM SS-R1 55
If the play area (“Play area” on page 21) is PLAYLIST,
make sure that the SS-R1 is stopped, playing, or paused,
and hold down the front panel MENU key (or the remote’s
FINDER key) to access the playlist finder screen.
Overview
When you first insert a CompactFlash card into the SS-R1,
three empty playlists (01–03) will automatically be created
on the card. You can register audio files from the card into
these playlists, and then select the desired playlist (the cur-
rent playlist) so that its files will be played when you speci-
fy Playlist as the play area.
To perform playlist-related operations, start by opening the
“playlist finder screen”. From this screen, proceed to the
“playlist menu screen” where you can add files to a playlist
or delete the entire contents of a playlist. From the playlist
finder screen, you can also proceed to the “playlist screen”
(which shows the files in the playlist), select a file for oper-
ations, and then move to the “file menu screen” where you
can add a file to the playlist, delete a file from the playlist,
or move a file within the playlist.
8 − Using the playlist finder
Opening the playlist finder screen
Navigating in the playlist finder screen
The playlist finder screen will show three playlists
(PLAYLIST_01–PLAYLIST_03).
At the right is shown the number of files (tracks) registered
in each playlist.
With the playlist finder screen displayed, turn the front
panel MULTI JOG dial (or use the remote’s CURSOR § ,
¶ keys) to select (highlight) the playlist that you want to
operate.
In this state you can perform the following operations:
To start playback from the beginning of the playlist
Press the PLAY key. Playback will begin, and you
will return to the home screen.
The playlist you selected will be specified as the cur
-
rent playlist.
•
To pause at the beginning of the playlist
Press the
READY key. The SS-R1 will pause, and
return to the home screen.
The playlist you selected will be specified as the cur
-
rent playlist.
To open the playlist screen
Press the front panel
MULTI JOG dial or ˚ key (or
the remote’s ENTER key or CURSOR ¥ key. The dis-
play goes as follow.
•
•