User's Manual

TASCAM MiNiSTUDIO CREATOR
11
6. Read the contents of the License Agreement,
and select “I accept the terms in the license
agreement” if you agree to the terms.
Then, click the “Next” button.
7. Click the “Install” button.
8. Click the “Install” button in the window that
opens to start installation.
9. The following screen appears when installation
has completed.
Click the “Finish” button.
10. The installer will quit and the Windows Settings
Panel will launch.
NOTE
After installing the software, the device
driver will be installed the first time the unit is
connected by USB. At this time, Windows will
automatically search Windows Update, so it
might take some time to recognize the unit
connection. If the unit is still not recognized after
some time, open the Software installation screen
from the message area at the bottom right of
the computer display, and click “Skip Obtaining
Drivers From Windows Update” to cancel the
search.
Installing the Mac software
NOTE
• Install the Mac software on the computer before
connecting the unit to it with the USB cable.
• Depending on the Gatekeeper setting, a warning
message might appear during installation. See
“Working with Gatekeeper” for information
about Gatekeeper.
8
Mac software installation procedures
1. Download the latest software for the operating
system you are using from the TEAC Global Site
(http://teac-global.com/) and save it on the
computer to be used with the unit.
2. Double-click “TASCAM_MiNiSTUDIO Installer_
XXX.dmg” (XXX is the version number), which is
the saved disk image file for the Mac software,
and double-click “ MiNiSTUDIO Installer.pkg”
inside the folder that opens.
NOTE
Depending on the computer’s settings, the
downloaded zip file might not have opened
automatically. In this case, open the zip file first
and then double-click the disk image file.
3. When the installer starts, click the “Continue”
button.
4. Next, select the desired language and click the
“Continue” button.