User's Manual

AXON™ 4 Jan 2010
TASER International Private & Confidential 15
Assembly
Assembling the HeadCam
1. Clip the HeadCam to the headband. Make sure the serial number faces down
towards the ground when you are wearing the headband.
2. Close the imager clamp on the HeadCam. You should hear a snap when it shuts.
3. Thread the wire from the HeadCam through the cable management clips in the
headband.
Assembling the Earpiece
1. Slip the earpiece tube onto the fixture on the back of the HeadCam.