User's Manual

AXON™ 4 Jan 2010
TASER International Private & Confidential 28
 You will hear the audio prompt “Privacy Mode Active” through the HeadCam.
The audio prompt will repeat in 15 minute intervals as a reminder that you are in
still in Privacy mode.
 The ATC touch screen will display with a red background so that you can easily
detect that your system is not buffering, or recording.
 You can still activate the EVENT mode from the Privacy mode, however, because
no content is being buffered while in the Privacy mode, the 30-second buffer will
not exist when the event starts recording. Again, both audio and video will record
simultaneously the moment you press the EVENT button.
 You cannot enter the Privacy mode directly from the Event Mode. The Privacy
mode can only be activated from Buffering mode.
 To exit the PRIVACY mode, press the PRIVACY button on the ComHub.
You can also use the touch screen and press the PRIVACY button and turn
Privacy OFF.
The PLAYBACK mode is a subsequent mode within the PRIVACY mode. You can
review, manage and edit your recorded events in Playback mode. Just as in the
PRIVACY mode, there will be no buffering available in this mode.
The PLAYBACK mode is discussed in detail in the Playing back Event Video section.
Standard AXON Operation
For the most part, you will most likely check out an ATC from an ETM at the beginning
of your shift, be in Event mode at different times during your shift, and then return the
ATC to the ETM at the end of your shift.
Typical Shift Scenario:
1. At the beginning of your shift, log in to the ATC and undock from the ETM.
The ATC will either have the yellow “Tap screen to log on to EVIDENCE.COM”
screen, or a green “READY” screen.