Owner manual

26
Chapter 5 Maintenance/Troubleshooting
Police/Military K- 9 Caution
ECD operators and K-9 ocers must work closely together to develop policies and procedures for deploying the
ECD when a K-9 is present. If a K-9 bites a probe or bites the suspect between the probes, the K-9 could receive
a shock. This could have a negative impact on the future duty use of the K-9.
Uploading Firmware Revisions
The X26P ECD internal rmware provides functionality for all aspects of the ECD. The rmware can be upgraded
to the most recent version by using an X26P/X2 ECD Dataport Download Kit (purchased separately) and
EVIDENCE Sync software (Online or Oine).
CAUTION
Do not remove the USB cable or shift the safety switch to the up (ARMED) position during the
reprogramming cycle.
Dataport Download Kit
Optional download kits are available to permit agencies to access the deployment information in the X26P ECD
memory through the EVIDENCE Sync software (Online or Oine).
NOTE: If you have a TASER CAM HD recorder, please see the TASER CAM HD Operating Manual for downloading
instructions.
The X26P ECD uses a USB adapter (download cable) to connect to any Windows® XP or Windows 7 computer.
The simplicity of USB makes using the dataport download kit an easy, fast process. The cable connects to the
ECD through the battery compartment.
USB Connection Status
The USB icon will blink at a 1-second rate when the connection is good.
EVIDENCE Sync Oine Software
If you do not have an EVIDENCE.com account, the EVIDENCE Sync software can be used in the Oine mode to
download the simplied Event Log to your local computer and print it. The EVIDENCE Sync Oine software will
not enable you to download the full Trilogy Log.