User manual

gpio.AO
Overview
The gpio.NET Core interface is extended by analogue outputs and a frequency
generator. Each output is capable to be either current or voltage source. The
modules easily integrate into existing Modbus systems and can be identified and
configured by a unique serial number even in a running system. Beyond that,
they offer a uniform set of registers over the hole gpio.NET family.
Draft
Drawing 1: Dimensions
Interfaces
For communication, gpio.NET modules feature up to two Modbus interfaces. R-
Series provide routing between those. The DSUB connectors (X10 and X11) are
only available in R-Series.
USB
The USB device port (X1) belongs to the standard equipment of gpio.NET cards.
Because of this, the module is accessible from prevalent PC or laptops. To deal
with issues resulting of this, Modbus ASCII is the only available protocol used
2/8