PanelA5 Technical Reference
PanelA5 PanelA5: Technical Reference Copyright © 2015 taskit GmbH All rights to this documentation and to the product(s) described herein are reserved by taskit GmbH. This document was written with care, but errors cannot be excluded. Neither the company named above nor the seller assumes legal liability for mistakes, resulting operational errors or the consequences thereof. Trademarks, company names and product names may be protected by law.
PanelA5 Table of Contents 1. Introduction ................................................................................................................. 1 2. Scope ........................................................................................................................... 2 3. Overview of Technical Characteristics ........................................................................ 3 3.1. CPU .............................................................................................
PanelA5 List of Figures 4.1. PanelA5 Layout Diagram .......................................................................................... 6 D.1. PanelA5 Dimensions ............................................................................................... 16 E.1. StampA5D3x Dimensions ....................................................................................... 17 F.1. PanelA5 Power Supply ............................................................................................ 18 F.
PanelA5 List of Tables 4.1. X7 Pin Assignment ................................................................................................... 7 4.2. X8 Pin Assignment ................................................................................................... 7 4.3. X8 Pin Assignment ................................................................................................... 8 4.4. X11 Pin Assignment .........................................................................................
Introduction 1. Introduction The PanelA5 is intended to be a highly configurable and ready-to-use HMI module for use in switchboards or machinery. It is available with a 7" LCD/TFT built-in capacitive or resitive touch. It is available in different housing with IP65 front. It has a wide choice of peripherals and is available in many configurations. Connectors can be straight or angled, DIO can be 24V, 12V or 5V and many more. Speak to the taskit support in case of needs not on display.
Scope 2. Scope This document describes the most important hardware features of the PanelA5. It contains all informations necessary to use the PanelA5. The Operating System Linux is described in a further document. The manual comprises only a description of hardware specific issues of the PanelA5. More information on the used StampA5D3x can be found in its relevant manual. Details on the AT91SAMA5D3x processor are already described in depth in the manual of the manufacturer Atmel®.
Overview of Technical Characteristics 3. Overview of Technical Characteristics 3.1. CPU Atmel AT91SAMA5D3x Embedded Processor featuring an Cortex-A5™ ARM® core with ARM v7-A Thumb2® instruction set. • CPU Frequency 528 MHz • 32KB Instruction Cache • 32KB Data Cache • Memory Management Unit (MMU) • Floating Point Unit (VFPv4) • 3.3V Supply Voltage, 1.8V Memory Bus Voltage, 1.25V Core Voltage 3.2.
Overview of Technical Characteristics • 8 x 5V/12V/24V Digital Out • 8 x Analogue In (alt. 8 x 5V/12V/24V Digital In) • 3 x Relais • gpio.net Extension Port 3.5. Interfaces Extension Bar • 1x Three-channel 32-Bit Timer/Counter 2 • 1x Two Wire Interface (TWI, I C) • Programmable Clock • PWM • 1 x SPI • 8 x ADC • 1 x Highspeed Multimedia Interface • 1 x CAN • Up to 41 Digital I/O 3.6.
Overview of Technical Characteristics 3.9. Dimensions • Dimensions: 170.0 x 116.
Layout Description 4. Layout Description Figure 4.1.
Layout Description 4.1. PanelA5 Connector Description 4.1.1. X1/X2 Stamp Connector Two 100 Pin finepitch connectors for taskit StampA5D36. 4.1.2. X3/X33/X26 DC IN Spring-clamp connection for 24V regulated DC-IN. It can be alternatively jumpered for 12V DC IN. Warning Do not connect voltages above the specified Voltage to the board. Overvoltage can result in damages beyond repair. 4.1.3. X5 Dual USB Host Ports Two high speed USB 2.0 host ports. 4.1.4. X6 RJ45 Jack RJ45 jack for 10/100 MBit/s ethernet.
Layout Description Pin Assignment Processor Pin 2 RXD PB28/RXD1 3 TXD PB29/TXD1 4 -DTR PE10/A10 5 GND GND 6 -DSR PE9/A9 7 -RTS PB27/RTS1/G125CK0 8 -CTS PB26/CTS1/GRX7 9 -RI PE1/A1 Table 4.2. X8 Pin Assignment 4.1.7. X9 DSUB-9 female Pin-header X9 is a DSUB-connector in RS232/RS485/RS422 levels. It corresponds to USART0 of the AT91SAMA5D3x. The driver chip can be switched between the different modes. Drive PC17/TF0 high for RS485 mode and low for RS232 mode.
Layout Description Pin Assignment Processor Pin 4 GND GND 5 NA 6 NA 7 NA 8 5V 9 NA 10 GND 5V GND Table 4.4. X11 Pin Assignment 4.1.9. X13 USB Device Port High speed USB 2.0 device port. 4.1.10. X14 FFC LCD Connector Brand Type EDT ETM0350G0DH6 EDT ETM0430G0DH6 EDT ETM0500G0DH6 EDT ETM0700G0DH6 Table 4.5. X14 Compatible LCDs 4.1.11. X15 FFC LCD Connector Brand Type Innolux AT070TN83V1 Table 4.6. X15 Compatible LCDs 4.1.12.
Layout Description Pin Assignment Processor Pin 1 AI0 PD24/AD4 2 AI1 PD25/AD5 3 AI2 PD26/AD6 4 AI3 PD27/AD7 5 AI4 PD28/AD8 6 AI5 PD29/AD9 7 AI6 PD30/AD10/PCK0 8 AI7 PD31/AD11/PCK1 9 GND GND Table 4.8. X19 Pin Assignment 4.1.14. X20 Three-way Pin Header for FTDI USB Debug Console These three pins export the DBGU of the StampA5D36 in LVTTL-level. They are for connection with the FTDI USB/TTL converter cable TTL-232R-RPi. 4.1.15.
Layout Description Pin GPIO 9 PD30 Periph. A Periph. B Periph. C AD10 11 Periph. C Periph. B Periph.
Layout Description 4.1.18. X24 IF Ten-way Pin Header Pin-header X24 has ten contacts in 2.54 mm grid pitch. It has identical RS232 signals to X7 and is an alternative assembling. It corresponds to USART2 of the AT91SAMA5D3X. RI can be powered by 5V by setting jumper J9 (default unset).
Peripheral Color Codes Appendix A. Peripheral Color Codes This table matches the color used to identify various peripherals in tables.
PanelA5 Electrical Characteristics Appendix B. PanelA5 Electrical Characteristics Ambient temperature 25℃, unless otherwise indicated Symbol Description Parameter Min. Typ. Max Unit VCC Operating Voltage 3.0 3.3 3.6 V VMEM Memory Bus Voltage 1.7 1.8 1.95 V VRES Reset Treshhold TRES Duration Pulse VIH of 2.93 Reset tbd High-Level Voltage Input 3.3V 2.0 VCC + 0.3 V VIL Low-Level Voltage Input 3.3V -0.3 0.
PanelA5 Environmental Ratings Appendix C. PanelA5 Environmental Ratings Symbol TA Description Parameter Ambient temperature Relative Humidity no condensation Operating Storage Min. Max. Min. Max. -20 70 -20 70 ℃ 90 %RH 90 Absolute Humidity <= Humidity@TA = 60℃, 90%RH Corrosive Gas not admissible Table C.1.
PanelA5 Dimensions Appendix D. PanelA5 Dimensions Figure D.1.
StampA5D3x Dimensions Appendix E. StampA5D3x Dimensions Figure E.1.
BOLZEN_M3 BOLZEN_M3 B8 1 BOLZEN_M3 B6 1 BOLZEN_M3 B7 1 B5 1 BOLZEN_M3 BOLZEN_M3 B4 1 BOLZEN_M3 B2 1 BOLZEN_M3 B3 1 B1 X27 X4 GND1 GND2 0ZCF0075AF2C Multifuse 60V, 0,75A 0ZCF0075AF2C Multifuse 60V, 0,75A F1 F2 VIN24 IC4-F IC4-E 12 10 8 6 4 GND3 74LVC07 13 11 9 IC4-D 5 IC4-C 3 IC4-B D3 2 GND4 +3V3 VBATT SHDN Si2319DS T1 IC4-A 2 1N4148WX D2 1N4148WX D7 74LVC07 1 C26 IC4-G L4 SHDN_BUF NR6028T2R2N C8 R11 R21 R22 C25 C24 4u7/50V 22k 10k
19 STAMPA5D3-BUS-FX8 +3V3 GND +3V3 GND +3V3 GND +3V3 GND PE31/IRQ/PWML1 PE30/NWAIT PE29/NWR1(NBS1)/TCLK2 PE28/NCS2/TIOB2/LCDDAT23 PE27/NCS1/TIOA2/LCDDAT22 PE26/NCS0/TXD2 PE25/A25/RXD2 PE24/A24/RTS2 PE23/A23/CTS2 PE20/A20/SCK2 GND PE19/A19/TXD3 PE18/A18/RXD3 PE17/A17/RTS3 PE16/A16/CTS3 PE15/A15/SCK3 PE14/A14 PE13/A13 PE12/A12 PE11/A11 PE10/A10 GND PE9/A9 PE8/A8 PE7/A7 PE6/A6 PE5/A5 PE4/A4 PE3/A3 PE2/A2 PE1/A1 PE0/A0(NBS0) GND PB31/DTXD PB30/DRXD PB29/TXD1 PB28/RXD1 PB27/RTS1/G125CKO PB26/CTS1/GRX7 PB25/SCK
R13 R17 R18 R19 PB30/DRXD PB31/DTXD PD15/CTS0/SPI0_NPCS2/CANTX0 PD17/RXD0 PD18/TXD0 PD16/RTS0/SPI0_NPCS3/PWMFI3 PC17/TF0 PC18/TD0 PC19/RK0 PC20/RF0 10k 10k 10k 10k PC10/MCI2_CDA//LCDDAT20 PC28/SPI1_NPCS3/PWMFI0/ISI_D9 PE23/A23/CTS2 PE25/A25/RXD2 PE3/A3 PE4/A4 PB30/DRXD PE5/A5 PE2/A2 PE26/NCS0/TXD2 PE24/A24/RTS2 PB31/DTXD PE6/A6 PD19/ADTRG 1 2 3 S1 IC18-F 12 X20 DEBUG 13 R190 R187 10k 10k R193 10k R192 10k PB18/G125CK 8 7 6 5 1 2 3 4 10k R24 10k R191 R1IN R2IN R3IN R4IN R5IN 28 C71
R65 100r R64 100r R63 100r PC6/ERXER/TIOA5 PC3/ERX1/TIOA4 PC2/ERX0/TCLK3 PC7/EREFCK/TIOB5 PC5/ECRSDV/TCLK4 PC4/ETXEN/TIOB4 PC0/ETX0/TIOA3 PC1/ETX1/TIOB3 10k, 1% R94 PC9/EMDIO PC8/EMDC/TCLK5 R94=Startup in Powerdown R82 1k5 C62 30pF/50V/C0G C61 14 11 2 3 R91 10r 1%, 1/10W NINT/REFCLKO CRS_DV/MODE2 16 TXEN 17 TXD0 18 TXD1 RXER/PHYAD0 7 RXD1/MODE1 8 RXD0/MODE0 10 1 C86 Q1 4u7/50V/X5R 12 MDIO 13 MDC VDDIO C56 100n/16V/X7R ABLSG-25.
PC15/MCI2_CK/PCK2/LCDDAT21 +5V HHSDMB HHSDPB HHSDMC HHSDPC HHSDPA HHSDMA 2 C65 100n/16V/X7R Option USB HOST INTERFACE R12 47k +5V-DEV DNP 1 NC 2 NC 3 NC 4 GND ATECC108-MAHDA IC11 5 1 IN OUT 3 FLG 4 EN GND AP2161WG-7 C2 IC16 R79 82k C60 PE30/NWAIT 22uF/10V/0805 8 VCC 7 NC 6 SCL 5 SDA C66 PA19/LCDDAT19/TWCK2/ISI_D3 PA18/LCDDAT18/TWD2/ISI_D2 +3V3 C11 100n/16V/X7R C69 100n/16V/X7R ATECC108-SSHDA 100u/10V PA19/LCDDAT19/TWCK2/ISI_D3 PA18/LCDDAT18/TWD2/ISI_D2 15p/50V 1 NC 2 NC 3
R143 10k PA27/LCDHSYNC PA26/LCDVSYNC PA28/LCDPCK R40 R93 PD20/AD0 PD22/AD2 PD21/AD1 PD23/AD3 DNP 0 0 PA14/LCDDAT14 PA13/LCDDAT13 PA12/LCDDAT12 PA17/LCDDAT17//ISI_D1 PA16/LCDDAT16//ISI_D0 PA15/LCDDAT15 PA8/LCDDAT8 PA7/LCDDAT7 PA6/LCDDAT6 PA11/LCDDAT11 PA10/LCDDAT10 PA9/LCDDAT9 PA2/LCDDAT2 PA1/LCDDAT1 PA0/LCDDAT0 PA5/LCDDAT5 PA4/LCDDAT4 PA3/LCDDAT3 Resistiver Touchscreen FFC-Slot für TFT Innolux AT070TN83V1 FFC-Slot 4pol.
