User manual

Linux Guide taskit GmbH
11.4. Product specific kernel settings
11.4.1. Portux 920t EU + SW, Portux-MiniPC
General kernel configuration
The default kernel configuration is loaded by entering:
ARCH=arm make portux920t_defconfig
This configuration has to be loaded at least one time after decompressing and compiling
the kernel sources from the starterkit-CD.
11.4.2. Portux Panel-PC
General kernel configuration
The default kernel configuration is loaded by entering:
ARCH=arm make portuxpanelpc_defconfig
This configuration has to be loaded at least one time after decompressing and compiling
the kernel sources from the starterkit-CD.
Input device(s)
To change the input driver configuration start menuconfig and go to:
device drivers -> Input device support -> Miscellaneous devices
To activate the input drivers activate (press SPACE until a '*' appears) the entry
“Portux/MoLux Input Drivers” and a list of available drivers appears.
Then:
● activate the entry “Touch panel component” to enable the driver for the touch panel
● activate the entry “Matrix keyboard component” to enable the driver for the matrix
keyboard
● activate the entry “PS/2 keyboard support” to enable the driver for the PS/2
keyboard
11.4.3. Panel-Card
General kernel configuration
The default kernel configuration is loaded by entering:
ARCH=arm make panelcard_defconfig
This configuration has to be loaded at least one time after decompressing and compiling
the kernel sources from the starterkit-CD.
Configure display driver
To change the backlight configuration start menuconfig and go to:
Page 43 of 65 Version 1.26 (2008-04-30)