FORTE CART FTE-CART WARNING: Over-tightening of screws and bolts will damage the station and cause metal frame to bend. Back of cart WARNING: Cord does not extend. Do not pull. To connect plug into wall socket, use an extension cord.
CONTENTS A. Ink Holder 1 pcs C. Screws M6x16 4 pcs Washer φ6X13X1 4 pcs M5 Allen Wrench 1 pcs D2. Power Supply Holder 1 pcs F. Glove Box 1 pcs B. Stainless Steel Medical Tray 1 pcs D1. Rinse Cup Holder 1 pcs E. Screws M6x12 2 pcs Screw caps 2 pcs G.
Use the M3 Allen Wrench remove screw before used.
1 3 A:Ink Holder 4 2 B:Stainless Steel Medical Tray D1:Rinse Cup Holder D2:Power Supply Holder 1 2 Step 1 : Ink Holder can be hooked over Step 2 : Place removable stainless steel the back of the Forte Cart for stability. medical tray into recessed area of Forte Cart top. 3、4( use screws C ) Step 3、4 ：Using M5 Allen wrench, Screws, and Washers (C) , attach Rinse Cup Holder (D1) & Power Supply Holder (D2) to side of Forte Cart as shown.
Paper towel holder and glove box holder can be mounted on either side of the cart. Simply remove the middle drawer, remove screws mounting the holders, and remount in the desired side. 5 F: Glove Box Holder Exterior of cart Paper Towel Holder Interior of cart Step5: Attach glove box holder by screwing 2 screws with spacers into the pre-drilled holes. Attach screw caps to each.
US SOCKET : HOW TO RESET THE FUSE F E Up F E Down To remove the drawer: 1.Empty drawer of its contents 2.Apply pressure to hinge upwards / downwards respectively 3.Pull drawer out slowly Re mo v o eb tto m w dra er When the surge protector trips, the switch will switch to the off position. Sockets are no longer powered. Press the switch to reset the surge protector. Once pressed current will flow and the sockets will become live.
