Use and Care Manual

ManualsBrandsTatahance ManualsChest Of Drawers47 in Height x 16 in Width x 32 in Depth 5-Drawer Wood Chest of Drawers in Brown

Table Of Contents

Width - 31.5"

Depth - 15.75"

Height - 47.24"

DIMENSIONS

ASSEMBLY INSTRUCTION FOR ACME FURNITURE

MODEL#97366/97368

Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which

may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware.

Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer.

For efﬁcient and speedy service, please indicate the model number and code letter of part(s) needed.

***Do not fully tighten screws until fully assembled.***

5-DRAWERS CHEST

Summary of content (10 pages)

PAGE 1
ASSEMBLY INSTRUCTION FOR ACME FURNITURE MODEL#97366/97368 Thank you for purchasing the quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and metal hardware. Compare with all parts are present. If any part(s) are missing or damaged, please contact your local furniture dealer. For efﬁcient and speedy service, please indicate the model number and code letter of part(s) needed.
PAGE 2
97366/97368 PARTS LIST A X1 Top G X1 Small drawer head M X5 Drawer bottom B X1 Left side H X5 Drawer Left N X1 Back C X1 Right side I X5 Drawer Right D X1 Bottom J X5 Drawer back E X4 Support K X5 Drawer support F X4 Large drawer head L X4 Foot
PAGE 3
HARDWARE LIST 1 X22 Cam bolt 7*35*12.
PAGE 4
ASSEMBLY INSTRUCTIONS Step 1.
PAGE 5
ASSEMBLY INSTRUCTIONS Step 2.
PAGE 6
ASSEMBLY INSTRUCTIONS Step 3.
PAGE 7
ASSEMBLY INSTRUCTIONS Step 4.
PAGE 8
ASSEMBLY INSTRUCTIONS Step 5.
PAGE 9
ASSEMBLY INSTRUCTIONS Step 6. 8 F F G F Extend the two outer slides of the runners so that they could align with the sides of the drawer. Make sure the pre-drilled holes from the drawer align with the screw holes of the outer slides. Secure two screws from the inside of the drawer using a Phillips screwdriver to tighten them to the outer slides.
PAGE 10
ASSEMBLY INSTRUCTIONS Step 7. A 17 14 16 15 Wall For safety,please use the strap to secure the uniton the wall. ASSEMBLY IS COMPLETED. Make sure the product is rested on a ﬂat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened.