USING THE MAGNETIC STRIP FREQUENTLY ASKED QUESTIONS GUIDE TO INDICATORS AND BEEPS cosnsnninionsmnsiimsnisssismsns 18 Solid Red Indicators Flashing Red Indicators evenness chess 19
REAL THESE INSTRUCTIONS BEFORE USING THIS CYMBAL, iT 1S INTENDED FOR HOUSEHOLD USE ONLY. « This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe wary and understand the hazards involved, Children shall not play with the appliance.
Keep the Cyborg free of Hat, hair and anything that may reduce airflow, Use twa hands when moving or carrying the Cyborg. Clean your Cyborg with a dry or damp cloth, The Power Adapter for the Charging Base must ba removed from the socket before cleaning or maintaining Unplug the Charging Base when not fn use for extended periods of time.
Robot Vacuum Cleans DE Charging Base Remote and Cleaning Brush {Dust Bin included) AdA Batteries -, ph Side Brush 2 integrated Water Tank Spare Washable Spare HEAP and Dust Bind with Mopping Pad and Sponge Washable Mopping Pad) BRE PEN hos Power Adapter Magnetic Strip 3M Adhesive Pads User Manual {for Charging Base} User Guide for VOL App
ROBOT VACUUM CLEANER Bumper WiFi Status Indicator Starvation Return to Charging Base Brush Guard Dust Bin Buber Power Switch Hair Brush Left Whee! Right Wheel A i Battery Compartment Anti-drop Sensor Anti-drop Sensor Side Brush Mount @ SG ’ Optical Flow Sensor Charging Contact Charging Contact Hall Sensor Hall Sensor Moroni-directional Wheel Natl-drop Sensor infrared Sensors infrared Sensors wc Ar Outlet
CHARGING BASE Power indicator infrared Sensors Charging Contact Charging Contact Storage Space for Bin ~~ R Adapter's Power Cord REMOTE Auto Mode Suction Power Forward Start/Pause Leeward Rightward Backward Spot Mode ~ Gel Mode Return to Charging Base WiFi Paling Hope WF Pairing: Press and hold the 5 button on the remote for 5 seconds and release until you hear 2 beeps from the robot and the Wir] status indicator flashes blue quickly.
Peel off sticker to reveal Power Switch. Remove protective material located on bath sides of the Cyborg, Attach the Side Brush into the Side Brush Mount on the bottom of the Bovary, stall the AAA batteries into the Remote.
Place the Charging Base on the floor, against a wall. Plug the Power Adapter into a wall socket and connect to the Charging Base, Remove all objects on the floor within a 12m radius. 1. Ensure the base is powered, which is indicated by a solid white Power Indicator anti, 2. Place the Charging Base where the Cyborg can easily access. 3. Ensure that the Charging Base is plugged in to avoid that the Cyborg can’t find the Charging Base when its battery power gets low. 4.
Pulse orange Solid blue Solid orange Flash rad Notes: 1. intakes the Cyborg up to 6.5 hours to fully charge. This will provide unto 154 minutes cleaning time for Auto Mode with the minimum suction power, 2. The Bovary will return to the Charging Base when its battery level Is low, Ata critically low battery level, it will stop moving tirelessly and will require you te manually place Ron the Charging Base. A.
> > Mates: 1. Remove any objects from the floor that may entangle the Cyborg, such as power cords, ropes, ete. 2. The Cyborg will mount all objects that are less than 18mm thick. if you de swinish for such items to be cleaned, please remove thee from the ares, 3. Do not operate the Cyborg on a wat surface when using It to vacuum dust, 4, Keep the Cyborgs away from furniture halt is raised 72mm or less from the ground(because the thickness of Cyborg is Tm.
CLEANING MODES Auto Mode After powering on, press {on the Bovary or £3 on the remote to begin Auto Mode, This will then instruct the Cyborg To clean all accessible space with the medium suction power {default level), The Cyborg will rectum to the Charging Base after finishing cleaning. * Press {1 on the Cyborg or Dl on the remote to pause the cleaning process; press again to resume.
Spot Mode This cleaning mode alms to intensively clean a specific area. Step Lo 777 Locate an area that needs intensive cleaning, such as ane with ots of dust. Move the Bovary to the center of this ens EER ses area. K SENS TD Step 2: Prose (6) to start the spot cleaning process. twill move in a spiral pattern. The maximum diameter of the spiral is approximately 1.2m {3.
Edge Mode This mode Is to thoroughly clean the edges along the wall or any furniture. Press (0) na the remote to begin the edge cleaning process. The Bovary will clear for approximately 20 minutes along any edges, then return to the Charging Base. * press (1) on the Cyborg or DJ on the remote to pause the cleaning process; press again to switch to Auto Mode, If you'd like to resume edge mode, press () on the Cyborg or DA on the remote to pause the auto mode, then press Eh again.
VACUUMING AND MOPPING THE FLOOR Step Lt Fill the integrated Water Tank and Dust Bin with water, Step dh Press and hold the lathe down to pull the Dust Bin out.
Step: Press and hold the latch down and insert the Integrated Water Tank and Dust Bin into the Cyborg, Step 4 Select 2 cleaning mote to start vacuuming and mopping the floor, Tig: Go to Honeywell App to adjust the water volume for mopping, Notes: 1. Take out the integrated Water Tank and Dust Bin when the Vivacious charging or not infuse. 2. Only use water in the Integrated Water Tank and Dust Bin. Do not use any dealing solution, even natural ones, which will cause damage to the Cyborg, 3.
Step 3: Peel off a piece of 3M Adhesive Pad, and stick it to one side of the Magnetic Strip. Cover only one side of the Magnetic Strip, © Tip The number of Adhesive Pads will vary depending on the length of the Magnetic Strip, Step 4 Peel off the other side of the Adhesive Pads, then utilize therm to fin the Magnetic Strip on the floor to create a no-go area.
Tips: remove and stick to the Roo again, iris not recommended to use the Magnetic Strip on carpet. If the Magnetic Srp rolls up, Make sure the Magnetic Strip is died on the same surface level as the Buyback, Keep the Magnetic RIP away from excessive hast sources, Le Power Input DAISY TT DEA Power Consumption 28% Battery Type DC 14.4¥ Li-ion Battery Charging Time Suction Power Three Levels Capacity of Dust Bin HORMEL.
FREQUENTLY ASKED QUESTIONS 21. The Cyborg isn't responding, * Make sure you press the Power Switch fo ON, * Check that the Bovary battery level is not critically low or empty. * Check that the batteries In the remote have power when operating the Cyborg with the remote, * When operating tha Cyborg with tha remote, check that the distance between the Cyborg and remote is within the effective range (Sm/167). 2. The remote doesn't work, * Check that the batteries In the remote have power.
7. The Cyborg calmer return to the Charging Base. * Turnover any obstacles near the Charging Base so the Buyback can defect it “Check how far apart the Cyborg and Charging Base are, The further apart, the longer it will take fo reach the Charging Base. "Cheek that the Cyborg battery level is not critically low or empty. * Clean the sensors on the Bumper of the Cyborgs and the Charging Base. 8. The Main Brush on the bottom of the Cyborg cannot work.
Solid Red indicators bespoke The Left/Right Wheel Is stuck. Bleeps The Side Brush is stuck, The suction inlets being Bho coked. 4 bags Thi Main Brush is stuck, Flashing Red Indicators Power off the Cyborg and remove the objects trapped in the wheal. Power off the Cyborg and remove the objects trapped in the Side Brush. Power off the Cyborg, then remove and employ the Dust Bin, Ensure there is ne hair or debris blocking the suction inlet.
EEE 2412 ~ 2472 MHz Operation Frequency FEE BUZ Lin HT: 2410 ~ 2470 Miz EEE B02. 100 HAG 2422 2467 MHz ‘Transmit Power [EIRE] = DBMS FCC Caution Any Changes or modifications aot expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
DISSED Warning This device complies with industry Canada license-exempt RSS standard{s}. Operation is subject to the following two conditions: {1 this device may not cause Interference, and {2} this device rust accept any interference, including interference that may cause undesired reparation of the device, Le present apparel est conforms aw CNR &industries Canada applicable aux apparels radio parapets de license.
