Instructions / Assembly

Table Of Contents

Assembly of the trampoline Mat

To assemble the trampoline Mat, use the

Spring tool(#8) to load on the Spring(#7) and

connect it to the Top frame(#3), as shown in

Figure 2.1

2.2

Start ① point

②

③

④

⑤

⑥

⑦

⑧

• Place the trampoline Mat (#1) on the floor in the Interior of the

frame assembled.

• Select a starting point (point ①) in the frame and load on the

first Spring(#7). To keep the tension on the mat balanced, then

go to the opposite site to load on the second spring on point ②,

then point ③, then point ④, and so on.

• Continue to attach the remaining springs in the middle of the

previously attached springs until all springs are installed.

Spring(# 7)

Triangular Rings

Trampoline Mat(# 1)

Top fram e(# 3)

Spring Tool (# 8)

①Point

2.1