Instructions / Assembly

DISASSEMBLY OF THE TRAMPOLINE AND ENCLOSURE
17
IMPORTANT
Once you have finished the assembly of the trampoline, go back over all of the nuts and bolts and
properly tighten all of them before using.
Read this entire manual and make sure all jumpers completely understand all of the safety rules
printed in the manual and on the various warning signs. Instruct all jumpers in the basic bounces
described in the manual.
CARE AND MAINTENANCE AND USE INSTRUCTIONS MUST BE READ CAREFULLY BEFORE USING
THE TRAMPOLINE. ADULT SUPERVISION IS REQUIRED AT ALL TIMES.
Disassembly of the Trampoline and Enclosure
If you need to disassemble the trampoline, please follow the assembly instructions in reverse and take special
care to retain all parts. Retain the original packaging for transport purposes.
Moving the Trampoline and Enclosure
To move the trampoline, it is recommended for the trampoline to be disassembled and then reassembled in the
new location. However, if you need to move the trampoline a short distance for any reason, you must use duct
tape or heavy industry tape to tape all leg joints together. To move the trampoline requires two or more people
to lift the trampoline from contact with the ground. Do not drag the trampoline along the ground. The
trampoline must be kept steady and horizontal to the ground during the move. Failure to follow these
instructions may result in the leg support coming loose which may cause serious injury or death.
DO NOT USE THE TRAMPOLINE WHEN THE ENCLOSURE IS REMOVED.
Do not make changes or add attachments to the trampoline that are not authorized genuine parts. The user
must carry out changes to the trampoline (e.g. the addition of an attachment) according to the instructions of
the manufacturer, particularly those attachments which include instructions on their assembly, necessary
measurements and the correct fastening (e.g. enclosures, climbing assistance).