Instructions / Assembly

3. Assembly Instruction
STEP 1:
STEP 2 : Repeat step 1 until all the poles are set up.
FIGURE 1
FIGURE 2
8
1 2
7
FIGURE 3
4B
4A
4B: vertical leg extender B
4A: vertical leg extender A
4B: vertical leg extender B
Mount the lower poles(#2) onto the
vertical leg extender B using part#3,
#4, #5 and #6. Tighten part #6 with
a wrench(#10).
Slide upper pole (#1) onto lower pole(#2); wrap them with pole cover and its PE sleeve(#7); slide cap(#8) onto the
top of upper pole(#1). Please make sure that open-ended cap is connected with upper pole A and upper pole
A connected with lower pole C, otherwise there is no chance to install the basketball board successfully.
upper pole A
lower pole C