Instructions / Assembly

8pcs

ＩＮＳＴＲＵＣＴＩＯＮ

Ｈｏｗ　ｔｏ　Ａｓｓｅｍｂｌｅ　Ａｗｎｉｎｇ：

１．　Ｓｌｉｄｅ　ｔｈｅ　ｒｅａｒ　ａｗｎｉｎｇ　ｒｏｄ（１１）　ｉｎｔｏ　ｔｈｅ　ｂａｃｋ　ｏｆ　ｔｈｅ　ａｗｎｉｎｇ　ｃｏｖｅｒ　（１２）．

２．　Ｃｏｎｎｅｃｔ　ｔｈｅ　ｆｒｏｎｔ　ａｗｎｉｎｇ　ｒｏｄ　（５）　ａｎｄ　ｔｈｅ　ｏｔｈｅｒ　ａｗｎｉｎｇ　ｒｏｄ　（４）．

３．　Ｃｏｎｎｅｃｔ　（２）－（３）　ｕｓｉｎｇ　Ｃ，　ｔｈｅｎ　ｉｎｓｅｒｔ　ｔｈｅ　ａｗｎｉｎｇ　ｃｏｖｅｒ　（１２）　ａｎｄ　ｊｏｉｎ　ｔｈｅ　ｓｉｄｅ　ｏｆ　ｔｈｅ　

ａｗｎｉｎｇ　ｍｅｃｈａｎｉｓｍ（１）．

４．Ａｓｓｅｍｂｌｅ　ｔｏ　ｔｈｅ　ａｗｎｉｎｇ　ｃｏｖｅｒ．

PAGE 1
ＩＮＳＴＲＵＣＴＩＯＮＨｏｗｔｏＡｓｓｅｍｂｌｅＡｗｎｉｎｇ：１．Ｓｌｉｄｅｔｈｅｒｅａｒａｗｎｉｎｇｒｏｄ（１１）ｉｎｔｏｔｈｅｂａｃｋｏｆｔｈｅａｗｎｉｎｇｃｏｖｅｒ（１２）．２．Ｃｏｎｎｅｃｔｔｈｅｆｒｏｎｔａｗｎｉｎｇｒｏｄ（５）ａｎｄｔｈｅｏｔｈｅｒａｗｎｉｎｇｒｏｄ（４）．３．Ｃｏｎｎｅｃｔ（２）－（３）ｕｓｉｎｇＣ，ｔｈｅｎｉｎｓｅｒｔｔｈｅａｗｎｉｎｇｃｏｖｅｒ（１２）ａｎｄｊｏｉｎｔｈｅｓｉｄｅｏｆｔｈｅａｗｎｉｎｇｍｅｃｈａｎｉｓｍ（１）．４．Ａｓｓｅｍｂｌｅｔｏｔｈｅａｗｎｉｎｇｃｏｖｅｒ． 12 12 12 8pcs
PAGE 2
Assem ble M ounting Rack : 1. Ensure center rods (7) and adjustm ent rods(10) are firm ly connected and that the adjustm ent rods can m ove easily within their sockets. 2. Slide the lower rods (8) into the other end of the center rods (7). 3. Rem ove the long bolts from the center rods(7) and slide the upper rods (6) to the center rods. 4. M easure the height of the scene. Slide (6) to the correct distance to fit the height of your preferred awning brace, fasten the long bolts.