Safety data sheet

SHENZHEN GREPOW BATTERY CO.,LTD.
TEL+86 755 29045795 FAX +86 755 61558171
HTTP://www.grepow.com E-mail:fangchaojun@grepow.cn
Date
Jan 05,2018 Report No:GRP-MSDS-20180105001
ADDWUSHIGANGCHUANGYIROADTONGFUYUINDUSTRIALPARK,LONGHUA VILLAGE
BAOANDISTRICT,SHENZHENCHINA
Use extinguishing agent suitable for local conditions and the surrounding environment Such as dry
powder , CO
2
.
Special hazards arising from the substance or mixture
Battery may burst and release hazardous decomposition products when exposed to a fire
situation. Lithium ion batteries contain flammable electrolyte that may vent, ignite and
produce sparks when subjected to high temperature(>150(302)), when damaged or
abused (e.g. mechanical damage or electrical overcharging); may burn rapidly with
flare-burning effect; may ignite other batteries in clothes proximity.
Advice for firefighters
Protective equipment: Wear self-contained respirator. Wear fully protective impervious
suit.
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation
Environmental precautions
Do not allow material to be released to the environment without proper governmental
permits.
Steps to be taken in case material is spilled or released
Remove ignition sources, evacuate area. Sweep up using a method that does not generate
dust. Collect as much of the spilled material as possible, placed the spilled material into a
suitable disposal container. Keep spilled material out of sewers, ditches and bodies of
water.
Waste disposal method
All waste must refer to the United Nations, the national and local regulations for disposal.
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Consumption of food and beverage should be avoided in work areas.
Wash hands with soap and water before eating, drinking.
Ground containers when transferring liquid to prevent static accumulation and discharge.
Section 6. Accidental Release Measures
Section 7. Handling and storage