Quick Start Guide

WAP-3518 Dual Band Wireless Router
Quick Start Guide
Panel
1
Power LED：
5
WAN Port：
Off
：
No power
Connect a network cable into this port
On(Green Light)
：
Device is ready
to establish WAN connection. When in
Flashing(Orange Light)
：
WPS is
MESH mode, WAN port works as a LAN
processing or enter the reset mode. Port.
2
5G Signal LED：
6
LAN Port:
No light
：
No 5GHz signal.
Connect a network cable into these
Green Light
：
5GHz Wireless system
ports to establish LAN connection.
is ready.
7
Reset Button:
Flashing Green Light
：
Transmitting or
Press and hold the button for 10
receiving data via wireless connection. seconds. When the power indicator is
3
2.4G Signal LED：
flashing orange light, the router will
No Light
：
No 2.4GHz signal.
enter the reset mode, and revert back to
Green Light
：
2.4GHz Wireless system
Factory settings.
is ready.
8
WPS Button:
Flashing Green Light
：
Transmitting or
Pushing this button will initiate automatic
receiving data via wireless connection. pairing.
4
Power (DC IN) Port：
Connect your router to an AC socket with
the power adapter.