Quick Start Guide

Wireless Connection
Method 1: Manually connect to the network
a. Plug in power adapter.
b. Use a network cable to connect modem and router's WAN port.
c. Connect your computer or mobile phone to router via WiFi:
 SSID：TTI_3518_5G or TTI_3518_2.4G
 Password：00000000 (default value)
Method 2: Use WPS to connect to the network
(Do not use WPS if the wireless network has not been encrypted)
a. Press down on the WPS button on router until the power light flashes orange indicating that
the WPS pairing is in progress.
b. When router power light flashes orange, start the WPS pairing on your wireless device
within 2 minutes, or follow the instructions on the wireless device to set WPS.
c. Your wireless device will start scanning and will connect to the router's wireless network.
When the power light on router stops flashing, the device and router has successfully
connected.