Quick Start Guide

Password：00000000 (default value)
c) Launch a web browser, type in the IP address (192.168.10.1) in the browser’s address bar of the
WAP-3518 device.
d) On the login page, type in the default user name (admin) and password (admin).
e) Follow the setup steps below to set up the Controller Device.
4. Click the EASYMESH tab on the left menu.
5. Then select the Role as an Agent (wlan0 is the default value for the Backhaul BSS).
6. Click Save & Apply to finish the Agent Device set up.
Easy Mesh Connection Set up
a) Press and hold the WPS bottom of the first (Controller) and the second WAP-3518 (Agent) for
more than two seconds, until the power light of both flashes orange indicating that the WPS
pairing is in progress.
b) Wait until the power light turn to green solid light, which indicates the WAP-3518 Controller and
Agent has been successfully connected wirelessly.
c) If necessary, you can set the third WAP-3518 (Agent), refer to the: Agent Device Set up & Easy
Mesh Connection Set up.