User Manual

GettInG Started

Step 5: LInkInG

The iRoam dock and receiver usually link automatically once you’ve

docked your iPod and plugged in the receiver. A solid blue LED on the

dock and the receiver indicates that the two pieces are linked.

If you get a blinking blue LED on the dock and/or receiver, try the

following steps to link the two manually:

1. Take the iRoam dock and iPod next to the receiver—keep the dock

and iPod connected.

2. Find the LINK buttons on the back panel of the receiver and on the

side of the dock.

iRoam dock, side view

iRoam receiver, back panel

3. Press and hold the LINK buttons on the receiver and dock for 5

seconds. The blue LEDs on each blink while the two pieces are

linking. These LEDs stay solid blue when the two have linked.

Now you’re ready to enjoy music from your iPod over your home stereo

with no wires attached! Just use your iPod like you normally would to

select songs, playlists, etc. And enjoy!

Step 6: powerInG YoUr Ipod (optIonaL)

You can use the iRoam’s transmitter to charge

your iPod. Just connect the USB mini-connector

end of the provided USB adapter cable to the

USB jack on the side of the dock. Connect the

other end of the cable to a USB power adapter

(not provided). Then, plug the USB power

adapter into a wall outlet.