2.4GHz Digital Wireless HD Headphones™ T R U E 2.
Important Information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
Table of Contents Introduction................................................................ 1 Features....................................................................... 1 Getting Started............................................................ 2 Headphone Buttons & Indicators................................ 5 Transmitter Jacks & Controls....................................... 5 Using your Headphones............................................... 6 Troubleshooting..................................
Getting Started Supplied Accessories This headphone system includes accessories that enable you to use your wireless headphone set in a number of ways. 2.4GHz wireless transmitter Stereo cable (3.5 mm jacks) Wireless headphones AAA batteries Stereo Y adapter cable (RCA/3.5 mm jack) AC power adapter Charging the Headset Before using your headphones for the first time, charge them for 3.5 hours using the supplied AC power adapter. To charge the headset unit: 1.
Hooking Up the Transmitter The 2.4GHz wireless transmitter works with a wide variety of audio sources, from portable MP3 players to A/V receivers to DVD players or gaming systems. The way you hook it up depends on the kind of output you want to use on your audio source. Transmitter (back panel) LINE IN DC IN LINK ON/OFF Connecting to a 3.5mm mini-jack output 1. Plug the 3.5mm cable into the headphone jack on your audio source. 2. Connect the other end of the 3.
Powering the Transmitter The 2.4GHz wireless transmitter runs on regular AC power or on 3 AAA batteries (included), so you can plug it in or install the batteries and take it with you. The choice is yours. Transmitter (back panel) LINE IN DC IN LINK ON/OFF AC power adapter Transmitter (bottom) To plug in the transmitter: 1. Connect the AC power adapter to the DC IN power supply jack on the transmitter's back panel. 2. Plug the adapter into an electrical outlet.
Headphone Buttons & Indicators Left headphone (side view) LED indicates charging (red) and communication with transmitter (blue) Volume up/down buttons increase or decrease the headphone volume link button tunes the headphones to the transmitter Power button turns the headphones on and off Transmitter Jacks & Controls Transmitter (back panel) LINE IN jack connects to your audio source LINE IN DC IN DC IN jack connects to the AC power adapter LINK ON/OFF ON/OFF switch turns the transmitter on and
Using your Headphones LINE IN DC IN LINK ON/OFF 1. Move the ON/OFF switch on the back of the transmitter to the ON position to turn the transmitter on. 2. Press the power button on the left headphone to turn the headphones on. power button 3. Switch on the audio source (TV, DVD, CD player, etc.) to which the transmitter is connected. If your audio source is a DVD or CD player, start a disc. 4. Simultaneously press the link buttons on the headphones and on the back of the transmitter.
Important Note About Audio Outputs If possible, use a fixed-level (or line-level) audio output from your audio source. This kind of output provides a consistent level of audio that doesn’t change when you adjust the source’s volume control. Fixed-level audio outputs from stereo receivers/amps are typically designated as tape or VCR audio output connections, sometimes marked on the component as ‘TAPE OUTPUT,’ ‘TAPE OUT,’ ‘TAPE REC, or ‘TAPE RECORD or REC OUT.
Troubleshooting The following troubleshooting guide takes you through some of the more common problems associated with the installation and/or operation of a wireless system. If the problem persists, please call toll-free 1-800-732-6866 or visit www.araccessories.com.
Specifications Transmitter Omni-directional 2.4GHz digital broadcast Effective transmitting range: up to 100ft. (30m)* Audio input: 3.5mm stereo jack Runs on 3 AAA batteries or UL-listed AC power adapter HD Headphones Easy, one-button pairing to 2.4GHz digital transmitter Patented dual-speaker design in each earcup: 30mm Neodymium drivers for left/right channels 40mm Neodymium drivers for subwoofers Frequency response: 20Hz–20kHz Distortion (THD): ≤0.
© 2007 Audiovox Accessories Corporation 111 Congressional Blvd., Suite 350 Carmel, IN 46032 USA www.araccessories.com AWD210_US_IB_01 Trademark(s) Registered All other brands and product names are trademarks or registered trademarks of their respective owners.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.