User's Manual

1



The Instruction of Alcatel Wi-Fi camera

2016/3/14

1. Download and install APK : Alcatel_1.0.0.7.apk

2. Execute app, Click on “Equipment”, “+”

3. Enable smart phone Wi-Fi and connect to camera AP(MAC

ID:CamAP20:F4:1B:07:5F:9A)

4. To scan QR code via APP(Fig.2)

5. Camera(Red LED indication flashes)

5-1.Type in UID

(DBUUB96CVD3W8M6GYHWJ )

5-2.Equipment Password (Default: 888888)

5-3.Click on top-right “V” to finish setting

P.S. When APP asks for changing password,

please follow to change it.

PAGE 1
The Instruction of Alcatel Wi-Fi camera 2016/3/14 1. Download and install APK : Alcatel_1.0.0.7.apk 2. Execute app, Click on “Equipment”, “+” 3. Enable smart phone Wi-Fi and connect to camera AP(MAC ID:CamAP20:F4:1B:07:5F:9A) 4. To scan QR code via APP(Fig.2) 5. Camera(Red LED indication flashes) 5-1.Type in UID (DBUUB96CVD3W8M6GYHWJ ) 5-2.Equipment Password (Default: 888888) 5-3.Click on top-right “V” to finish setting P.S. When APP asks for changing password, please follow to change it.
PAGE 2
6. Setting Done(Camera already connected) 7. Click on “camera” to enable camera video, The bar at bottom side is video apps 8. APP shows that IP cam was connected and click on to enable camera Wi-Fi settings 9. Choose an appropriate Wi-Fi for camera connection.
PAGE 3
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.