User's Manual

4. Turn ON the receiver (Rx) dongles by pressing and holding the
POWER button on the receiver dongle for 2 seconds.
F The Power Status LED on the receiver (Rx) will show Solid Green LEDs
F The ashing Green LED on the transmitter (Tx) will turn to Solid Green indicating
communications between (Tx) and (Rx) is established.
5. Place the receiver dongle on the amp as shown. Alternatively the
receiver can be placed on the oor next to the foot pedal or stomp box.
6. Power up your Amp, Mixer, Digital Recorder or Foot pedal are you
are ready to go!
RECEIVER CONNECTION
Wi-AudioLink
30
z
v
(Rx)
v
POWER
LINK