User's Manual

Chapter 3 Use Your Camera
2
be saved there.
 Capture a still image using Still mode
1. Switch to Still mode. (You will see the
icon
shown near the lower right of the screen, and the
number of images you still can capture, according to
available memory and your current settings.)
2. Position the camera lens to capture the desired
image. You may scroll the Navigation Button
up/down to zoom in/out. (The current zoom ratio is
shown near the lower right of the screen.)
3. Select Menu to choose advanced capturing settings
shown as the right picture above. (The items of
settings are specified as the table next page.)
4. Press the Camera Button, or press down the
Navigation Button to capture images.
The options of menu in Still mode:
Note: “1X” indicates normal (unzoomed) size.
Option Function
Video Switch to Video mode
Mode
Normal/Burst/Timer
The capture mode
Brightness
+3/+2/+1/ 0/-1/-2/-3
Select suitable brightness
for capturing.
Resolution
The zoom capability
depends on the resolution
QQVGA/QVGA/VGA/SXGA
Zoom
zoomX1/zoomX2/zoomX4
SXVGA
VGA
QVGA
QQVGA
1X
1X, 2X
1X, 2X, 4X
1X, 2X, 4X
White Balance
Automatic/Sunny/Cloudy/Night/
Black & White/Sepia/Negative/
Fluorescent/Incandescent
Adjust for various lighting
conditions
Flash
On/Off
Switch on/off the flash
Options
General/Slide Show/Camera/ Video
Specify the saved files,
output format, or other
settings in different mode.