User's Manual

Chapter 5 Get Connected
8
6. If desired, enter the name of the other device in
Name, and select Next.
7. In the Services screen, select Done.
To accept a bond:
Make sure that Bluetooth is turned on and in
the Discoverable mode.
1. When prompted to bond with the other device, select
Yes.
2. In the Passkey screen, enter a passkey of between
1 and 17 characters, and select Next. You must
enter the same passkey that was entered on the
device requesting the bond.
3. If desired, enter the name of the other device in
Name, and select Next.
4. Select Done. The bond is now created. Now you
can exchange information with the other device.
To delete a bond:
1. Settings＞Connections＞Bluetooth
2. Select Devices from the Menu.
3. Select the bond you want to delete＞Menu＞Delete.
5.4 Modem Link
Using Modem Link, you can use your Smartphone as
an external modem for another device or computer by
using a bluetooth or USB connection.
 Set up the Smartphone as a modem
1. Select Start＞More＞Accessories＞Modem Link.
2. Select USB in the Connection field.
3. Select Access point name. (Please consult the
service provider the appropriate Access point name.)
And then select Activate.
4. Connect your Smartphone to your computer via USB
cable. (The ActiveSync program will stop
automatically.)
5. If prompted to install a driver, use the modem drivers
provided on the companion CD. Follow the wizard
to install the device.
6. In the Found New Hardware Update Wizard
screen, select Install from a list or specific
location (Advanced)＞Next.