User's Manual
Chapter 6 Messaging Features
2
NOTE: Before configuring E-mail on your Smartphone,
you must have an E-mail account. You will also need
to configure your Smartphone's connection, as
described in Chapter 5.
4. Leave the Auto setup box checked to obtain E-mail
setting from the Internet. Your Smartphone will
make an Internet connection and attempt to
determine the server settings for E-mail.
NOTE: If the Auto setup couldn’t obtain e-mail
settings, select Next to enter settings manually as
following steps. If you are not sure what to enter, then
consult with your network administrator.
5. Enter your user Name and Password. In Domain,
enter the domain name (if necessary)>Select Save
password>Next.
NOTE: If your password is saved, you don’t need to
enter it each time you connect to your E-mail server.
Please note that if you save your password and then
lose your phone, your E-mail could be accessed by
someone else.
6. In Server type, scroll to select the type of E-mail
server that hosts your mailbox (IMAP4 or POP3).
In Account name, enter a name for this account.
You must use a different name for each account
that you set up.
7. In Network, scroll to the type of network that your
E-mail server runs on>Next.
8. Enter information about your Incoming Server and
Outgoing Server>Next.
9. Select the message download option>Next.
10.Select the connection option>Next